GB/T 36402-2018Thermal analysis-mass spectrometry coupling method for ceramics materials (English PDF)
陶瓷材料的热分析-质谱联用测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36402-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
May 1, 2019
Scope
GB/T 36402-2018 is the English-translated version of 陶瓷材料的热分析-质谱联用测试方法.
GB/T 36402-2018 gives a combined thermal analysis and mass spectrometry test method for ceramic materials. It is used to detect the mass changes, the enthalpy changes and the composition of the gases evolved when a ceramic material is heated under controlled temperature in a set atmosphere.
The standard first defines the techniques involved, including thermal analysis, thermogravimetry with its TG and DTG curves, differential thermal analysis and differential scanning calorimetry in its heat-flux and power-compensation forms.
It then specifies the equipment, the specimens and reference materials, the checking of the instruments, the analysis procedure and the test report. Clause 2 cites GB/T 8170 on rounding off numerical values and limiting values. It was issued on 7 June 2018 and has applied since 1 May 2019.
Found what you need?
Document preview — GB/T 36402-2018
National Standard of the People's Republic of China
- ICS
- 81.060.30
- Classification
- Q 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions for the thermal analysis-mass spectrometry test method for ceramic materials, equipment, specimens and reference materials, and instruments. Check method, analysis procedure and test report.
This standard applies to the ceramic material in the process of temperature control and a certain atmosphere of the quality changes, changes in the enthalpy and the evolution of gas composition detection.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 8170 Numerical Rounding Rules and Representation and Determination of Limit Values
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Thermal analysis
A technique that measures the relationship between a certain physical property of a substance and the temperature or time under a controlled temperature and a certain atmosphere. Commonly used hot points Analytical instruments include thermogravimeters, differential scanning calorimeters, simultaneous thermal analyzers, thermomechanical analyzers, thermal dilatometers, and dynamic mechanical instruments.
3.2 Thermogravimetry; TG
The technique of measuring the relationship between the mass of a sample and the temperature or time under a controlled temperature and a certain atmosphere. Thermogravity curve (TGcurve) is Thermogravimetry measures the curve of mass (or mass fraction) as a function of temperature or time. The ordinate of the curve is mass m (or mass Fractional), upward indicates mass increase, downward indicates mass decrease; abscissa indicates temperature T or time t, from left to right indicates temperature increase or time Increase between. The derivative thermogravimetric curve (DTG curve) is measured from the TG curve to mass The graph of the relationship between the rate of change and temperature or time.
3.3 Differential Thermal Analysis
The technique of measuring the temperature difference between a sample and a reference and the temperature or time under a controlled temperature and a certain atmosphere. Differential thermal analysis curve (DTAcurve) is a curve measured by a differential thermal analyzer. The ordinate of the curve is the temperature difference (deltaT) between the sample and the reference, and the abscissa is the temperature Degree or time, absorption/heat release peak in the direction shown by the curve suction/heat identification mark prevail.
3.4 Differential scanning calorimetry; DSC
Measure the heat flow rate or heating power (difference) to the sample or the reference under the program temperature control and certain atmosphere. Technology. According to the measurement method, it can be divided into heat-flux differential calorimetry (DSC) and power compensation differential scanning calorimetry (DSC). (power-compensationDSC). Hot flow DSC is the temperature and temperature of the sample and the reference when the temperature is controlled by the program. The temperature difference associated with the heat flow rate versus temperature or time. Power compensated DSC is to control the temperature in the program and maintain the sample and reference […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 36402-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 8170-1987 — Rules for rounding off of numerical values
GB/T 8170-2008 — Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 36402-2018
$145.00