GB/T 36340-2018General specification for raised access floor for electrostatic protection (English PDF)
防静电活动地板通用规范
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 36340-2018 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
June 7, 2018
Implementation date
January 1, 2019
Scope
GB/T 36340-2018 is the English-translated version of 防静电活动地板通用规范.
GB/T 36340-2018 is the general specification for anti-static raised access floors, the raised floors whose surface is an anti-static laminate or coating.
It defines the related terms, such as the anti-static veneer material, the support system and the surrounding-support arrangement in which the panel edges rest on cross beams, and describes the composition and structure of the floor.
It also sets the classification and naming of products, the technical requirements, the test methods and the inspection rules, and closes with packaging, transport and storage.
The floors covered are those installed in data centres, clean workshops, control centres and offices, and raised floors in other places may use it as a reference. It was issued on 7 June 2018 and has applied since 1 January 2019.
Found what you need?
Document preview — GB/T 36340-2018
National Standard of the People's Republic of China
- ICS
- 35.020; 91.060.30
- Classification
- L 63;P32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Composition and Structure
- 5 Classification and Naming
- 6 Technical Requirements
- 7 Test method
- 8 Inspection Rules
- 9 Packaging, Cartoning, Shipping, and Storage Requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the terms and definitions, composition and structure, classification and nomenclature of anti-static raised floor, technical requirements, test methods, and inspections. Rules and so on.
This standard applies to anti-static raised floors used in data centers, clean workshops, control centers and offices. Other related places The raised floor can also be used as a reference.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest version (including all amendments) applies to this document.
GB/T 191 packaging, storage and transportation logo
GB/T 2408-2008 Determination of the combustion properties of plastics - Horizontal and vertical methods (IEC 60695-11-10:1999, IDT)
GB/T 2828.1-2012 Count sampling inspection procedures Part 1. Batch inspection sampling based on AQL Plan (ISO 2859-1:1999, IDT)
GB/T 4085 semi-rigid PVC block floor
GB/T 5779.1 fasteners, surface defects, bolts, screws and studs General requirements
GB 6566 Radioactive Nuclides for Building Materials
GB/T 7911 thermosetting resin impregnated paper high pressure decorative laminate (HPL)
GB 8624-2012 Classification of combustion performance of building materials and products
GB 18580 interior decoration materials artificial board and its products formaldehyde release limit
GB/T 26539 anti-static ceramic tile
GB 50325 Code for Indoor Environmental Pollution Control of Civil Construction Projects
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Anti-static raised floor
Anti-static veneer material or anti-static coating, anti-static performance of the raised floor.
3.2 Anti-static veneer material
Laminated on the floor substrate surface, with anti-static properties and decorative effect of the surface layer material.
3.3 Support system
Structures that support the floor, including adjustable supports, side support, beams, etc.
3.4 Surrounding support
The floor support system is provided with a cross beam, and the four sides of the floor are laid on the cross beam.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2408-2008Plastics - Determination of burning characteristics - Horizontal and vertical test
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 4085Semirigid polyvinyl chloride floor tiles
- GB/T 5779.1Fasteners. Surface discontinuities. Bolts, screws and studs for general requirements
- GB 6566Limits of radionuclides in building materials
GB/T 26539
Similar standards
How to Download GB/T 36340-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18580-2025 — Decorating and refurbishing materials for interior use - Limit on formaldehyde emission of wood-based panels and their products
GB 50325-2020 — Standard for indoor environmental pollution control of civil building engineering
GB 6566-2010 — Limits of radionuclides in building materials
Secure payment via Stripe
Payments accepted
GB/T 36340-2018
$355.00