GB/T 36160.1-2018Technical specification for distributed energy system of combined cooling, heating and power—Part 1: Refrigeration and heating subsystem (English PDF)

Foreword

GB/T 36160 "Technical Conditions for Distributed Cooling and Heating Energy System" is divided into the following three parts.

--- Part 1. Refrigeration and heating units;

--- Part 2. Power unit;

--- Part 3. Energy storage unit.

This part is the first part of GB/T 36160.

This part is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This part of GB/T 36160 specifies a distributed cooling and heating energy system cooling and heating unit based on gas or liquid fuel. Classification composition, evaluation indicators, system configuration requirements, operation optimization and management.

This section applies to distributed cold and heat energy systems using gas or liquid fuels as primary energy, selection of refrigeration and heating units Type, design optimization and operational management. Among them, the single-machine capacity of the prime mover of the building distributed energy supply station is less than or equal to 10MW; The stand-alone unit capacity of the station can be less than or equal to 25MW.

The evaluation indicators used in this section are mainly gas, and liquid fuels can be implemented under the same technical conditions. Does not include compensation in the evaluation indicators The energy output by the cooling device and the energy consumed by the auxiliary system.

This section does not apply to the test statistical evaluation of distributed cold and hot energy systems that have been put into operation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this document. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 1576 industrial boiler water quality

GB/T 2589 General rules for comprehensive energy consumption calculation

GB 13271 Boiler Air Pollutant Emission Standard

GB/T 18362 direct-fired lithium bromide absorption type cold (warm) water unit

GB/T 18431 steam and hot water type lithium bromide absorption chiller

GB/T 29044 Heating and air conditioning system water quality

GB/T 30577 gas-steam combined cycle waste heat boiler technical conditions

Energy saving rate of GB/T 33757.1 distributed thermal power systems - Part 1. Fossil energy drive systems

GB/T 36160.2 Technical requirements for distributed thermal power systems - Part 2. Power units

GB/T 34620 Class I lithium bromide absorption heat pump unit

GB 50016 Building Design Fire Code

GB 50019 Industrial building heating ventilation and air conditioning design specification

GB 50028 town gas design code

GB 50041 boiler room design specification

GB 50050 industrial circulating cooling water treatment design specification

GB/T 50155 Terminology standard for heating, ventilation and air conditioning

GB 50189 Public Building Energy Efficiency Design Standard

GB 50736 Design code for heating, ventilation and air conditioning of civil buildings

GB 51131 Gas-fired combined heat and power engineering technical specification

DL/T 5508 gas distributed energy station design specification

JGJ 158 Energy Storage Air Conditioning Engineering Technical Regulations