GB/T 35726-2017Performance tesing rules of parallel active power quality curing device (English PDF)
并联型有源电能质量治理设备性能检测规程
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35726-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35726-2017 is the English-translated version of 并联型有源电能质量治理设备性能检测规程.
GB/T 35726-2017 is the Chinese standard "Performance tesing rules of parallel active power quality curing device". Its scope clause reads: This standard specifies the detection rules, testing conditions and testing methods of parallel active power quality control equipment (hereinafter referred to as equipment).
This standard applies to the power electronic converter based parallel power quality control equipment performance testing. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35726-2017
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- K 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 detection rules
- 4.1 Test classification
- 4.2 test items
- 5 test conditions
- 5.1 General Requirements
- 5.2 testing equipment
- 5.3 test mode
- 6 test method
- 6.1 Test Connection
- 6.2 compensation performance testing
- 6.3 Grid Adaptive Testing
- 6.4 Insulation performance testing
- 6.5 Mechanical Property Testing
- 6.6 Electromagnetic Compatibility Testing
- 6.7 Security Performance Testing
- 6.8 Temperature Detection
- 6.9 Noise Detection
- References
1 Scope
This standard specifies the detection rules, testing conditions and testing methods of parallel active power quality control equipment (hereinafter referred to as equipment).
This standard applies to the power electronic converter based parallel power quality control equipment performance testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4208-2017 enclosure rating (IP code)
GB 4824-2013 Industrial, scientific and medical (ISM) RF equipment disturbance characteristics Limits and methods of measurement
GB/T 7251.1-2013 Low-voltage switchgear and control equipment - Part 1. General
GB/T 11022-2011 high-voltage switchgear and control equipment standards common technical requirements
GB/T 11287-2000 Electrical relays - Part 21. Measurement of vibration, shock, bump and earthquakes in relays and protection equipment
Test Part 1. Vibration test (sine)
Shock and collision tests for measuring relays and protection equipment
High voltage test techniques - Part 1. General definitions and test requirements
Electromagnetic compatibility (EMC) test and measurement techniques Electrostatic discharge (IMD) immunity test
GB/T 17626.3-2016 Electromagnetic compatibility testing and measurement techniques RF electromagnetic field radiation immunity test
GB/T 17626.4-2008 Electromagnetic compatibility test and measurement technology Electrical fast transient burst immunity test
GB/T 17626.5-2008 Electromagnetic compatibility test and measurement techniques surge (impact) immunity test
GB/T 17626.6-2008 Electromagnetic compatibility test and measurement techniques RF field induced conduction disturbances immunity
GB/T 17626.11-2008 electromagnetic compatibility test and measurement techniques voltage dips, short interruptions and voltage variations immunity test
Electromagnetic compatibility (EMC) - Tests and measurement techniques - Ringing wave immunity test
General requirements for power quality monitoring equipment GB/T 19862-2016
Power quality voltage sag and short interruptions GB/T 30137-2013
Power quality terms GB/T 32507-2016
3 Terms and definitions
GB/T 32507-2016 defined and the following terms and definitions apply to this document.
3.1 Parallel active power quality control equipment
A parallel compensation method for power quality control based on power electronic converter technology for dynamic reactive power compensation, harmonics and three-phase unbalance
Compensation device.
Note. Rewrite NB/T 41006-2014, Definition 3.1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35726-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35726-2017
$355.00