Valid

GB/T 35706-2017Technical rule for ice mapping of power grid (English PDF)

电网冰区分布图绘制技术导则

Preview PDF

This is a limited preview

Buy now to download the full PDF (19 pages)

Need quotation for your management?

Get a formal quotation for GB/T 35706-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 29, 2017

Implementation date

July 1, 2018

Scope

GB/T 35706-2017 is the English-translated version of 电网冰区分布图绘制技术导则.

GB/T 35706-2017 is the Chinese standard "Technical rule for ice mapping of power grid".

Its scope clause reads: This standard stipulates the drawing rules for distribution maps of the ice network, including basic data, ice thickness calculation, drawing and revision of ice distribution maps, etc. This standard applies to 110 (66) kV and above AC and DC voltage level grid ice distribution map, 35kV and below AC and DC Voltage level grid can be used as reference. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 35706-2017

National Standard of the People's Republic of China

ICS
29.240.99
Classification
F 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Basic Information
  • 5 Ice thickness calculation
  • 6 Ice Map
  • 7 Ice Distribution Map Revision
  • Appendix A (Informative) Data Collection of Meteorological Stations during the Ice-Covering Period
  • Appendix B (Normative Appendix) Meteorological Site Wire Ice Accumulation Observation Data Collection
  • Appendix C (Normative Appendix) Actual Observation Data of Ice Coating
  • Appendix D (Normative Appendix) Ice Cover Data Survey
  • Appendix E (informative annex) Calculation method for equivalent ice thickness
  • Appendix F (informative) Reference calculation method for ice thickness calculation
  • Appendix G (informative) Nominal ice thickness calculation example
  • Appendix H (Informative) Mesh interpolation and revision methods for ice thickness estimation
  • Appendix I (Informative Appendix) ×× Grid Ice Distribution Figure Legend

1 Scope

This standard stipulates the drawing rules for distribution maps of the ice network, including basic data, ice thickness calculation, drawing and revision of ice distribution maps, etc.

This standard applies to 110 (66) kV and above AC and DC voltage level grid ice distribution map, 35kV and below AC and DC Voltage level grid can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article

Pieces. For undated references, the latest version (including all amendments) applies to this document.

Specification for GB 50061 66kV and below overhead power lines

Design Specification for GB 50545 110kV~750kV Overhead Transmission Lines

GB 50665 1000kV Overhead Transmission Line Design Specification

DL/T 741 overhead transmission line operation procedure

DL/T 5158 Technical Specification for Meteorological Survey of Power Engineering

QX/T 45 Ground Weather Observation Specification

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Rain glaze

The supercooled water droplets with large particle diameters collide with the surface of objects with a temperature of 0°C and below, forming a glassy transparent or matte surface with rough

Ice cover. The ice is transparent and strong, with high density and strong adhesion.

3.2 Haze softrime

The supercooled water droplets with smaller particle diameters, which float with the airflow, collide with the surface of an object with a temperature of 0°C or less and are instantly frozen into small ice particles. Ice grain

There are pores between, with white appearance and granular structure, low density, weak adhesion.

3.4 Rainy day glazeday

The date of the rainstorm.

3.5 Smoky day rimeday

The date of haze.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 35706-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
19 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 35706-2017

$345.00