GB/T 35687-2017Specification of LSB for large air cooling steam turbine (English PDF)
大型空冷汽轮机末级叶片技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35687-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35687-2017 is the English-translated version of 大型空冷汽轮机末级叶片技术规范.
GB/T 35687-2017 is the Chinese standard "Specification of LSB for large air cooling steam turbine". Its scope clause reads: This standard specifies the large-scale air-cooled turbine last stage rotor blade design, manufacture, dynamic frequency test, back pressure protection, marking, packaging and protection Technical requirements.
This standard applies to the power of.200MW level and above (direct air or indirect air-cooled) the end of the rotor blades, other Type of air-cooled steam turbine and medium and small capacity air-cooled steam turbine can be implemented by reference. Its clauses include terms and definitions; design requirements.
Found what you need?
Document preview — GB/T 35687-2017
National Standard of the People's Republic of China
- ICS
- 27.040
- Classification
- K 54
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 design requirements
1 Scope
This standard specifies the large-scale air-cooled turbine last stage rotor blade design, manufacture, dynamic frequency test, back pressure protection, marking, packaging and protection
Technical requirements.
This standard applies to the power of.200MW level and above (direct air or indirect air-cooled) the end of the rotor blades, other
Type of air-cooled steam turbine and medium and small capacity air-cooled steam turbine can be implemented by reference.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 8732 turbine blade steel
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Air-cooled turbine
Condensing steam turbine that takes advantage of ambient air and takes away heat from steam turbine exhaust through an air cooled heat exchanger.
3.2 Flutter
Under the interaction of unsteady aerodynamic force, inertial force and elastic force, the input energy to the vane vibration is continuously input to make the self-excited vibration continue.
The formation of aeroelastic instability vibration.
3.3 Dynamic frequency modulation test rotatingvibrationtest
Test on the Test of Rotational Vibration Kinetics of Full - Size Physical Vane.
4 design requirements
4.1 aerodynamic design
4.1.1 Principles
Pneumatic design should be the last stage leaves the corresponding technical requirements, at the same time should be based on the operating characteristics of air-cooled machine in the working conditions within the scope of change optimization.
4.1.2 Enter the conditions
4.1.2.1
Axial exhaust volumetric flow as a final stage aerodynamic design of the basic input parameters.
4.1.2.2
The end load of the last blade (ie the mass flow per unit discharge area) is used as the basic input parameter for strength design.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35687-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35687-2017
$145.00