GB/T 35470-2017Natural sodium bentonite geosynthetic clay liner for rail transportation (English PDF)
轨道交通工程用天然钠基膨润土防水毯
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35470-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
November 1, 2018
Scope
GB/T 35470-2017 is the English-translated version of 轨道交通工程用天然钠基膨润土防水毯.
GB/T 35470-2017 is the Chinese standard "Natural sodium bentonite geosynthetic clay liner for rail transportation".
Its scope clause reads: This standard specifies the designation, general requirements, technical requirements, test methods, inspection rules, marking, packaging, storage and transportation of natural sodium bentonite geosynthetic clay liner.
This standard is applicable to needle-punched film-coated geosynthetic clay liner (GCL-OF) made of natural sodium bentonite as the main raw material for waterproofing in the rail transportation engineering.
This standard is not applicable to rail transportation engineering with high-concentration electrolyte solutions. Its clauses include designation; general requirements; technical requirements; swelling index /(ml/2 g) >= 24; durability /(ml/2 g) >= 20; methylene blue index /(g/100 g) >= 30; filtrate volume /ml <= 18.
Found what you need?
Document preview — GB/T 35470-2017
National Standard of the People's Republic of China
- ICS
- 91.120.30
- Classification
- Q 17
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Designation
- 4 General requirements
- 5 Technical requirements
- 6 Test method
- 7 Inspection rules
- 8 Marking, packaging, storage and transportation
- Annex A (Normative) Identification test method of natural sodium bentonite
- Annex B (Normative) Test method for permeability coefficient
- Annex C (Normative) Test method for resistance to hydrostatic pressure
1 Scope
This standard specifies the designation, general requirements, technical requirements, test methods, inspection rules, marking, packaging, storage and transportation of natural sodium bentonite geosynthetic clay liner.
This standard is applicable to needle-punched film-coated geosynthetic clay liner (GCL-OF) made of natural sodium bentonite as the main raw material for waterproofing in the rail transportation engineering.
This standard is not applicable to rail transportation engineering with high-concentration electrolyte solutions.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 328.14-2007 Test methods for building sheets for waterproofing - Part 14: Bitumen sheets for waterproofing-flexibility at low temperature
GB/T 2791-1995 Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly
GB/T 4666-2009 Textiles - Fabrics - Determination of width and length
GB/T 5005-2010 Specifications of drilling fluid materials
GB/T 13760-2009 Geosynthetics - Sampling and preparation of test specimens
GB/T 15788-2005 Geosynthetics - Wide-width tensile test
GB/T 17643-2011 Geosynthetics - Polyethylene geomembrane
GB/T 17690-1999 Geosynthetics - Plastic woven film yarn geotextile
GB/T 19978-2005 Geotextiles and geotextile-related products - Determination of the puncture resistance
GB/T 20973-2007 Bentonite
3 Designation
The product designation consists of this standard number, product type: GCL-OF (needle-punched film-coated geosynthetic clay liner), bentonite variety: N (natural sodium bentonite), mass per unit area, length and width.
Example: A natural sodium bentonite geosynthetic clay liner with a length of 30 m, a width of 6 m and a mass per unit area of 5,000 g/m2 may be designated as:
GB/T 35470-2017 GCL-OF/N/5000/30-6
4 General requirements
4.1
Nonwoven geotextile with a mass per unit area of 220 g/m2 should be used.
4.2
The plastic woven film yarn geotextile used in the product shall meet the requirements of GB/T 17690-1999, and UV resistant plastic woven film yarn geotextile with a mass per unit area of 110 g/m2 should be used.
4.3
The polyethylene geomembrane used in the product shall meet the requirements of GB/T 17643-2011, and its thickness shall not be less than 0.15 mm.
5 Technical requirements
5.1 Technical requirements for bentonite
Technical indicators of bentonite shall meet those specified in Table 1.
Table 1 Bentonite properties
No. Test item Indicator
1 Content % of bentonite particle (with a size of 0.2 mm ~ 2 mm) >= 80
2 Swelling index /(mL/2 g) >= 24
3 Durability /(mL/2 g) >= 20
4 Methylene blue index /(g/100 g) >= 30
5 Filtrate volume /mL <= 18
6 Identification of natural sodium bentonite particles Identified as natural sodium bentonite particles
5.2 Appearance quality
The product shall have flat surface, uniform thickness, and uniform stitch spacing without holes, broken edges or residual broken needles.
5.3 Length and width tolerance
The negative deviation shall not be greater than 1% of the nominal value.
5.4 Physical and mechanical properties
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35470-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 35470-2017
$235.00