GB/T 35250-2017Intermetallic compound film filter (English PDF)
金属间化合物膜过滤器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 35250-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 29, 2017
Implementation date
July 1, 2018
Scope
GB/T 35250-2017 is the English-translated version of 金属间化合物膜过滤器.
GB/T 35250-2017 is the Chinese standard "Intermetallic compound film filter".
Its scope clause reads: This standard specifies the intermetallic compound membrane filter terms and definitions, product classification, basic parameters, the use of requirements, the main components to Seeking, testing methods, inspection rules, judgment rules, signs, instructions, packaging, transportation and storage.
This standard applies to metallurgy, coal chemical industry, phosphorus chemical industry.200 °C ~ 600 °C dust control. Cement, ceramics, solid waste incineration and other lines Industry can refer to the implementation. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 35250-2017
National Standard of the People's Republic of China
- ICS
- 13.020
- Classification
- J 88
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 product categories
- 5 basic performance requirements
- 6 filter requirements
- 7 main parts requirements
- 8 test method
- 9 Inspection rules
- 10 decision rules
- 11 mark, manual
- 12 packaging, transportation, storage
- Appendix A (Normative) Filter dust concentration and resistance performance test
1 Scope
This standard specifies the intermetallic compound membrane filter terms and definitions, product classification, basic parameters, the use of requirements, the main components to
Seeking, testing methods, inspection rules, judgment rules, signs, instructions, packaging, transportation and storage.
This standard applies to metallurgy, coal chemical industry, phosphorus chemical industry.200 °C ~ 600 °C dust control. Cement, ceramics, solid waste incineration and other lines
Industry can refer to the implementation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without tolerance
GB 4053.1 Fixed ladders and platforms - Safety requirements - Part 1. Steel ladders
GB 4053.2 Fixed ladders and platforms - Safety requirements - Part 2. Steel ladders
GB 4053.3 Fixed ladders and platform safety requirements - Part 3. Industrial guard railings and steel platforms
GB/T 5249 Determination of pore size of permeable sintered metal gas bubbles
GB/T 6804 sintered metal bushing determination of the radial crushing strength
GB/T 7963 Sintered metal materials (not including cemented carbide) Tensile specimens
GB/T 7964 sintered metal materials (not including cemented carbide) room temperature tensile test
GB/T 9969 Industrial Products Manual General
GB 12158 General Guidelines for Prevention of Electrostatic Accidents
GB/T 13306 signs
GB/T 13384 mechanical and electrical product packaging General technical conditions
GB/T 16157 fixed sources of exhaust particulate matter and gaseous pollutants sampling method
GB/T 16845 duster terms
Permeability - Determination of air permeability of sintered metal materials
GB 50058 explosion hazardous environment power plant design specifications
Specification for detection and alarm of flammable gases and toxic gases in petrochemical industry
GBZ /T 192.1 Workplace airborne dust determination - Part 1. Total dust concentration
JB/T 4711 Pressure Vessel Coating and Transport Packaging
General technical requirements for heavy machinery - Part 3. Welded parts
NB/T 47003.1 steel welded pressure vessel
YS/T 1134-2016 Iron-aluminum-metal compound sintered porous material filter element
3 Terms and definitions
GB/T 16845 defined and the following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 35250-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 35250-2017
$235.00