GB/T 34649-2017Magnetron sputtering ruthenium target (English PDF)
磁控溅射用钌靶
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34649-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 34649-2017 is the English-translated version of 磁控溅射用钌靶.
GB/T 34649-2017 is the Chinese standard "Magnetron sputtering ruthenium target". Its scope clause reads: This standard specifies the ruthenium target magnetron sputtering requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificate and Order (or contract) content.
This standard applies to the field of microelectronics sputtering ruthenium target magnetron sputtering (hereinafter referred to as ruthenium target). Its clauses include terms and definitions; requirements.
Found what you need?
Document preview — GB/T 34649-2017
National Standard of the People's Republic of China
- ICS
- 77.150.99
- Classification
- H 68
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 requirements
1 Scope
This standard specifies the ruthenium target magnetron sputtering requirements, test methods, inspection rules and signs, packaging, transportation, storage, quality certificate and
Order (or contract) content.
This standard applies to the field of microelectronics sputtering ruthenium target magnetron sputtering (hereinafter referred to as ruthenium target).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1804 General tolerances Tolerances for linear and angular dimensions without tolerances
GB/T 5163 Sintered metal materials (excluding cemented carbide) Permeable sintered metal material density, oil content and open area
Determination
GB/T 6394 metal average grain size determination method
GB/T 14265 metal materials, hydrogen, oxygen, nitrogen, carbon and sulfur analysis methods General
GB/T 23275 Methods for chemical analysis of ruthenium powder Determination of lead, iron, nickel, aluminum, copper, silver, gold, platinum, iridium, palladium, rhodium and silicon glow discharge
Mass spectrometry
YS/T 837 Sputtering target - backplane combined with quality ultrasonic testing methods
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Magnetron sputtering physical vapor deposition; PVD
A method of physical vapor deposition coating. By introducing an electric field and a magnetic field on the surface of the target, the magnetic field is used to restrict the charged particles
High plasma density, and the use of an electric field of inert gas (usually Ar gas) particles accelerated bombardment of the target surface, thereby sputtering out of the material atoms or
Atomic group, the final deposition to form a film coating.
3.2
Palladium for magnetron sputtering prepared from metallic ruthenium was used to prepare ruthenium film plating.
4 requirements
4.1 Product Classification
4.1.1
ruthenium target divided by chemical composition Ru-99.95, Ru-99.99, Ru-99.995, Ru-99.999 four grades.
4.1.2
According to the target welding method can be divided into single type and welding type, backplane materials, including aluminum, copper and copper alloy.
4.1.3
ruthenium target cross-sectional shape can be divided into round, rectangular and shaped (ring, triangle) and so on.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34649-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34649-2017
$145.00