GB/T 34621-2017Oil boom (English PDF)
围油栏
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34621-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 14, 2017
Implementation date
May 1, 2018
Scope
GB/T 34621-2017 is the English-translated version of 围油栏.
GB/T 34621-2017 is the Chinese standard "Oil boom". Its scope clause reads: This standard specifies the name and type of booms column composition, structure, technical requirements, test methods, inspection rules, as well as signs, packaging, transportation Lose and store This standard applies to the control of the oil surface of the oil boom. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 34621-2017
National Standard of the People's Republic of China
- ICS
- 13.020
- Classification
- Z 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Name and model number
- 5 Boom structure
- 6 technical requirements
- 7 Test methods
- 9 Packaging, marking, transportation and storage
- Appendix A (Normative) Float ratio test method
- Appendix B (Normative) Minimum total tensile strength test method
- Appendix C (Normative) Fire booms water part of the high temperature resistance test methods
- Appendix D (Normative) Gas (water) chamber air tightness and pressure resistance test method
- Appendix E (Normative) Boom hydrostatic floating test method
1 Scope
This standard specifies the name and type of booms column composition, structure, technical requirements, test methods, inspection rules, as well as signs, packaging, transportation
Lose and store
This standard applies to the control of the oil surface of the oil boom.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 531.1 vulcanized rubber or thermoplastic rubber test methods into the hardness - Part 1. Shore Hardness Tester (Shore Hardness)
GB/T 549 welded anchor chain
GB/T 6388 transport packaging shipping symbols
GB/T 12584 rubber or plastic coated fabric low temperature impact test
Rubber, plastics or plastic coated fabrics - Determination of resistance to flexural damage GB/T 12586-2003
GB/T 19089 Rubber or plastics coated fabrics - Determination of abrasion resistance by Martindale method
GB/T 20027 Determination of the breaking strength of rubber or plastic coated fabrics
Rubber or plastic coated fabrics - Accelerated weathering test GB/T 24135-2009
Rubber, plastics - coated fabrics - Determination of resistance to liquids GB/T 24136-2009
HG/T 2580-2008 Rubber or plastic coated fabrics - Determination of tensile strength and elongation at break
HG/T 2581.1-2009 Rubber or plastics coated fabrics - Determination of tear resistance - Part 1. Constant speed tear method
HG/T 3046-2011 Appearance of the fabric conveyor belt quality requirements
HG/T 3050.2 Rubber or plastics coated fabrics - Determination of full roll properties - Part 2. Determination of the total mass per unit area, in units
Area of the coating quality and the basis of the quality of the fabric area
HG/T 3052 Rubber or plastics coated fabrics - Determination of adhesion strength
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Mechanically floating fences for containment of floating oil and floats.
3.2 Broadening rate ratioofendswideningtoboomlength
Test boom with booms in the water after the opening width and length ratio.
3.3 Connector
Permanently attached to the booms for connecting the booms together or connecting the booms to other auxiliaries.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 34621-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 34621-2017
$435.00