Valid

GB/T 34546.2-2017Technical guides for marine ecological damage assessment—Part 2: Marine oil spil (English PDF)

海洋生态损害评估技术导则第2部分：海洋溢油

Preview PDF

This is a limited preview

Buy now to download the full PDF (29 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34546.2-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

February 1, 2018

Scope

GB/T 34546.2-2017 is the English-translated version of 海洋生态损害评估技术导则第2部分：海洋溢油.

GB/T 34546.2-2017 is the Chinese standard "Technical guides for marine ecological damage assessment—Part 2: Marine oil spil". Its scope clause reads: GB/T 34546 provisions of this part of the marine oil damage assessment of marine ecological damage procedures, methods, content and technical requirements.

This section applies to the People's Republic of China waters under the jurisdiction of the assessment of ecological damage caused by oil.

Found what you need?

Document preview — GB/T 34546.2-2017

National Standard of the People's Republic of China

ICS: 07.060
Classification: E 01

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Evaluation Procedure
5 to assess the job level and content
5.1 Assessment of job level
5.2 Assessment of the content of the work
6 Marine Oil Spill Ecological Damage Investigation
6.1 Data Collection and Use
6.2 Oil Spill Investigation
6.3 Marine Ecological Environment Damage Investigation
6.4 Marine environment sensitive area survey
7 marine oil spill source diagnosis
7.1 Principle
7.2 Determination of oil spill
7.3 Site Monitoring
7.4 Oil Spill Path Analysis
8 Subjects and degree of ecological damage caused by marine oil spills
8.1 Background Value Selection
8.2 Scope of seawater quality and extent of damage determination
8.3 The extent of the impact of marine sediment and the extent of damage identified
8.4 Limits of extent of marine life and degree of damage
8.5 Shoreline Impact Area and Degree of Damage Determined
8.6 The extent of the impact of the marine environment sensitive areas and the degree of damage determination
9 Ecological damage value of marine oil spills
9.1 Calculation of marine ecological damage value
9.2 Costs of recovery of the marine ecosystem
9.3 Marine Ecological Rehabilitation Cost Calculation
9.4 Investigation and Evaluation Fees
10 Assessment Report on Ecological Damage of Marine Oil Spills
10.1 Guidelines for the preparation of the assessment report on ecological damage to marine oil spills
10.2 Formulation of Assessment Report on Ecological Damage of Marine Oil Spills
10.3 Content of Assessment Report on Ecological Damage of Marine Oil Spills
Appendix A (Normative) Oil spill survey and estimation methods
Appendix B (Normative) Oil spill shore monitoring method
Appendix C (Normative) Damaged habitat rehabilitation
Appendix D (Normative) Biological Species Restoration
Appendix E (Normative) Marine Oil Spill Ecological Damage Assessment Report Format and Content
References

1 Scope

GB/T 34546 provisions of this part of the marine oil damage assessment of marine ecological damage procedures, methods, content and technical requirements.

This section applies to the People's Republic of China waters under the jurisdiction of the assessment of ecological damage caused by oil.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 265 Determination of kinematic viscosity and kinematic viscosity of petroleum products

GB/T 267 Determination of flash point and ignition point of petroleum products (open cup method)

GB/T 1884 crude oil and liquid petroleum products density laboratory determination (density meter method)

GB 3097 seawater quality standards

GB/T 3535 pour point determination of petroleum products

GB/T 12763 (all parts) Marine survey code

GB/T 13377 Determination of density or relative density of crude oil and liquid or solid petroleum products Capillary plug pycnometer and graduated

Double capillary pycnometer method

Seabasing standards of observation

Technical guideline for marine functional zoning GB/T 17108-2006

GB 17378 (all parts) Marine monitoring code

GB 18421 Marine biological quality

GB 18668 Quality of marine sediments

Technical Guidelines for Environmental Impact Assessment of Marine Engineering GB/T 19485-2014

GB/T 21247 sea oil spill identification system specification

Determination of 16 polycyclic aromatic hydrocarbons in seawater GB/T 26411 gas chromatography - mass spectrometry

GB/T 28058 Marine Ecological Capital Assessment Technical Guidelines

HY/T 069 red tide monitoring technical regulations

HY/T 080 coastal wetland ecological monitoring technical regulations

HY/T 081 mangrove ecological monitoring technical regulations

HY/T 082 Coral reef ecological monitoring technical regulations

HY/T 083 seagrass bed ecological monitoring technical regulations

HY/T 087 Guidelines for Coastal Marine Ecological Health Assessment

Marine Natural Reserves Monitoring Technical Regulations (State Oceanic Administration, April.2002)

Technical regulations for monitoring seawater aquaculture (State Oceanic Administration, April.2002)

Technical Regulations for Environmental Monitoring of Beaches (State Oceanic Administration, April.2002) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 29 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

GB/T 20481-2026|GB/T 20486-2026|GB/T 22482-2026|GB/T 28593-2026|GB/T 33670-2026|GB/T 33675-2026

How to Download GB/T 34546.2-2017

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.