Valid

GB/T 34538-2017The high temperature coal carbonization and product quantitative determination (English PDF)

高温炼焦试验及焦化产品产率评价方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34538-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

May 1, 2018

Scope

GB/T 34538-2017 is the English-translated version of 高温炼焦试验及焦化产品产率评价方法.

GB/T 34538-2017 is the Chinese standard "The high temperature coal carbonization and product quantitative determination".

Its scope clause reads: This standard specifies the principle of high-temperature coking test and coking product yield evaluation methods, test equipment, equipment and materials, the sample taken And preparation, test procedures and results calculation.

This standard applies to high-temperature coal coking and product evaluation methods, low-temperature carbonization and temperature distillation test can refer to the implementation. Its clauses include principle; reagents, materials and equipment.

Found what you need?

Document preview — GB/T 34538-2017

National Standard of the People's Republic of China

ICS
75.160.10
Classification
H 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 principle
  • 4 Reagents, materials and equipment

1 Scope

This standard specifies the principle of high-temperature coking test and coking product yield evaluation methods, test equipment, equipment and materials, the sample taken

And preparation, test procedures and results calculation.

This standard applies to high-temperature coal coking and product evaluation methods, low-temperature carbonization and temperature distillation test can refer to the implementation.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Determination of total moisture in coal GB/T 211-2007

GB/T 220 coal - Determination of carbon dioxide chemical reactivity

Coal screening test methods

Coke industry analysis method

Determination of mechanical strength GB/T 2006 metallurgical coke

GB/T 2286 Determination of total sulfur content of coke

Determination of water content of coking products GB/T 2288-2008

GB/T 4000 coke reactivity and post-reaction strength test method

GB/T 4511.2 Determination of coke drop strength

Technical specification for mechanical sample preparation of coke reactivity and post - reaction strength

3 principle

According to the coking process, the raw coal is put into the metal coal briquette, the bottom heating method is adopted, and the coal is heated to

950 °C, and maintain a certain constant temperature time, the coal after thermal decomposition and coking process and produce coke, gas, tar and water, measured its production

Product yield and quality evaluation of these products.

In order to ensure complete coking coal tar condensate produced during the experiment with a temperature of 10 °C ± 0.5 °C indirect cooling water circulating water

Gas; using a circulating water at a temperature of 75 °C indirect heating tube condenser wall to recover the inner wall of the coal tar condensate, separation of coal tar and chemical

Water together.

4 Reagents, materials and equipment

4.1

Nitrogen gas Purity >=99.99%.

4.2

Electronic Balance Electronic scales used in the experiment have different ranges. One range.200kg, flu <= 10g; range 100kg, flu

<= 10g; range 2kg, flu <= 1g.

4.3 automatic moisture measuring device

Measuring range >= 6kg, the sense of volume <= 0.1g.

4.4

wet gas flowmeter .0.5m3/h, accuracy of not less than 1.0%.

4.5

Thermometer and barometer Mercury thermometer range 0 °C ~ 50 °C, barometer range 960hPa ± 5hPa ~ 1060hPa ± 5hPa.

4.6 Tubular condenser

Heat transfer area of 2m2.

4.7 Recycling water machine

Adequate heating and cooling capacity to ensure circulating water temperature control range 10 °C ~ 75 °C.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34538-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34538-2017

$145.00