GB/T 34503-2017Tungsten tubes (English PDF)
钨管
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34503-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 34503-2017 is the English-translated version of 钨管.
GB/T 34503-2017 is the Chinese standard "Tungsten tubes". Its scope clause reads: This standard specifies the tungsten tube requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or order Single) content.
This standard applies to the tungsten powder produced by powder metallurgy. Products can be applied to fused quartz glass furnace, sapphire crystal furnace, high temperature sintering furnace The heating body, melt and thermal field components. Its clauses include requirements.
Found what you need?
Document preview — GB/T 34503-2017
National Standard of the People's Republic of China
- ICS
- 77.150.99
- Classification
- H 63
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 requirements
- 3.1 grade and delivery status
- 3.2 chemical composition
- 3.3 product shape
1 Scope
This standard specifies the tungsten tube requirements, test methods, inspection rules, marking, packaging, transportation, storage, quality certificate and contract (or order
Single) content.
This standard applies to the tungsten powder produced by powder metallurgy. Products can be applied to fused quartz glass furnace, sapphire crystal furnace, high temperature sintering furnace
The heating body, melt and thermal field components.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3850 dense sintered metal materials and determination of density of cemented carbide
GB/T 4324 (all parts) tungsten chemical analysis methods
3 requirements
3.1 grade and delivery status
3.1.1
The product code is FWG-1.
3.1.2
Product delivery status is divided into "sintering" and "sintering machined" two kinds of delivery status.
3.2 chemical composition
W content calculated by impurity reduction method, and should not be less than 99.95%. Impurity content should be consistent with the provisions of Table 1.
Table 1 % element
Content (mass fraction) no greater than element
Content (mass fraction) no greater than element
Content (mass fraction) no greater than element
Content (mass fraction) no greater than
Al 0.002 Mg 0.003 Pb 0.001 O 0.007
Fe 0.006 Ni 0.005 Bi 0.001 - -
Ca 0.005 Si 0.002 C 0.01 - -
3.3 product shape
The shape of the product shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34503-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34503-2017
$145.00