Valid

GB/T 34407-2017Test method for the wall thickness of plastic pipes by ultrasonic (English PDF)

塑料管道壁厚超声波检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34407-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 29, 2017

Implementation date

April 1, 2018

Scope

GB/T 34407-2017 is the English-translated version of 塑料管道壁厚超声波检测方法.

GB/T 34407-2017 is the Chinese standard "Test method for the wall thickness of plastic pipes by ultrasonic". Its scope clause reads: This standard specifies the plastic pipe wall thickness ultrasonic testing methods and equipment testing equipment, calibration equipment, wall thickness measurement, the results and recording.

This standard applies to the ultrasonic wave can be transmitted at a constant speed and can be obtained and resolved back reflection, and the same material Thickness measurement of plastic solid wall pipes and fittings.

Its clauses include terms and definitions; method overview; test equipment and equipment.

Found what you need?

Document preview — GB/T 34407-2017

National Standard of the People's Republic of China

ICS
83.140.30
Classification
G 33

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 method overview
  • 5 test equipment and equipment

1 Scope

This standard specifies the plastic pipe wall thickness ultrasonic testing methods and equipment testing equipment, calibration equipment, wall thickness measurement, the results and recording.

This standard applies to the ultrasonic wave can be transmitted at a constant speed and can be obtained and resolved back reflection, and the same material

Thickness measurement of plastic solid wall pipes and fittings.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

Plastics - Terms and definitions

GB/T 2918 plastic sample conditioning and testing of the standard environment

GB/T 12604.1 Non-destructive testing - Ultrasonic testing

Thermoplastics pipes, fittings and valves - General terms and definitions

3 Terms and definitions

GB/T 2035-2008, GB/T 12604.1 and GB/T 19278 defined terms and definitions apply to this document.

4 method overview

When using the ultrasonic pulse echo method to measure the thickness, the thickness value (T) is the product of the speed of sound and the half of the travel time of the ultrasound in the material, see

Formula 1).

T = V × t/2 (1)

In the formula.

T --- material thickness, in millimeters (mm);

V --- material velocity of sound, in millimeters per second (mm/s);

t --- ultrasonic transmission back and forth in the material time, in seconds (s).

5 test equipment and equipment

5.1 ultrasonic thickness gauge

5.1.1

Ultrasonic thickness gauge should have "sound speed setting" and "zero correction" function, can be applied to non-metallic materials testing.

NOTE Some sonic guns have the same name for Sound Velocity Settings as Material Selection or Sound Velocity Correction.

5.1.2

ultrasonic thickness gauge accuracy should not be less than 0.01mm.

5.1.3

ultrasonic thickness probe, cable should be matched.

5.1.4

ultrasonic thickness gauge should be used directly contact single crystal straight probe.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34407-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34407-2017

$135.00