Valid

GB/T 34342-2017Test method for heat transfer coefficient of building envelope (English PDF)

围护结构传热系数检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34342-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 14, 2017

Implementation date

May 1, 2018

Scope

GB/T 34342-2017 is the English-translated version of 围护结构传热系数检测方法.

GB/T 34342-2017 is the Chinese standard "Test method for heat transfer coefficient of building envelope". Its scope clause reads: This standard specifies the terms and definitions of the building envelope detection method of heat transfer coefficient, detection principle, test conditions, testing procedures, Data processing, test report.

This standard applies to the homogeneous structure of buildings and non-homogeneous structure of building envelope heat transfer coefficient on-site inspection.

Not suitable for translucent protective knot Heat transfer coefficient detection. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 34342-2017

National Standard of the People's Republic of China

ICS
91.060.10
Classification
P 32

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 detection principle
  • 5 test conditions
  • 6 test step
  • 7 data processing
  • 8 test report
  • Appendix A (Normative) testing equipment
  • Appendix B (normative) hot box device calibration verification

1 Scope

This standard specifies the terms and definitions of the building envelope detection method of heat transfer coefficient, detection principle, test conditions, testing procedures,

Data processing, test report.

This standard applies to the homogeneous structure of buildings and non-homogeneous structure of building envelope heat transfer coefficient on-site inspection. Not suitable for translucent protective knot

Heat transfer coefficient detection.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 8484 building exterior doors and windows insulation performance classification and testing methods

GB/T 13475 Determination of heat transfer steady - state properties of heat transfer Calibration and protection of hot box method

Specification for thermal design of civil buildings

3 Terms and definitions

The following terms and definitions apply to this document.

3.1 Heat transfer coefficient

Under steady-state conditions, the heat transferred through the unit area per unit of time when the air temperature difference between the two sides of the envelope is 1K.

3.2 Hot box device

On-site detection of building envelope heat transfer coefficient of the device. In the test site inside, the establishment of heat transfer test environment, measured by the hot box, the environment plus

Heater and controller.

3.3 Cold box device

Auxiliary on-site detection of heat transfer coefficient of the envelope structure of the device. On the outside of the site under test, lower the air temperature outside the area under test from the cold box

Box and refrigeration components.

3.4 Hot box method

The use of hot box device (if necessary, with the cold box device) to measure the calorific value inside the hot box and the measured site inside and outside temperature, through the meter

Calculate the measured part of the heat transfer coefficient detection method.

3.5 Heterogeneitystructurebuildingenvelope

In the heat transfer process, due to uneven internal structure, the formation of conduction heat flow and the surface temperature of non-uniform envelope.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34342-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34342-2017

$205.00