GB/T 34255-2017Poly(butylene succinate-co-butylene adipate) (PBSA) resin (English PDF)
聚丁二酸-己二酸丁二酯(PBSA)树脂
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34255-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 7, 2017
Implementation date
April 1, 2018
Scope
GB/T 34255-2017 is the English-translated version of 聚丁二酸-己二酸丁二酯(PBSA)树脂.
GB/T 34255-2017 is the Chinese standard "Poly(butylene succinate-co-butylene adipate) (PBSA) resin". Its scope clause reads: This standard specifies the requirements polybutylene succinate - adipate (PBSA) resin, test methods, inspection rules, marking, packaging, transport And storage.
This standard applies to 1,4-succinic acid, 1,6-adipic acid, 1,4-butanediol as the main raw material synthesis of poly succinate - adipate Diester resins.
Found what you need?
Document preview — GB/T 34255-2017
National Standard of the People's Republic of China
- ICS
- 83.080.01
- Classification
- Y 28
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
1 Scope
This standard specifies the requirements polybutylene succinate - adipate (PBSA) resin, test methods, inspection rules, marking, packaging, transport
And storage.
This standard applies to 1,4-succinic acid, 1,6-adipic acid, 1,4-butanediol as the main raw material synthesis of poly succinate - adipate
Diester resins.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method
GB/T 1040.2-2006 Plastics - Determination of tensile properties - Part 2. Test conditions for molding and extrusion of plastics
Plastics - Determination of Izod impact strength GB/T 1843-2008
Plastics sampling methods
GB/T 2918-1998 plastic sample conditioning and testing of the standard environment
GB/T 3682-2000 Thermoplast melt mass flow rate and melt volume flow rate determination
Representation and determination of rules for repair of numerical values and limit values GB/T 8170-2008
Plastics - Determination of bending properties GB/T 9341-2008
Plastics - Determination of ash - Part 1. General methods
Plastics - Polyamides - Part 2. Determination of water content
Test method for fiber grade polyester chips (PET) GB/T 14190-2008
Preparation of injection molded test specimens of thermoplastic materials - Part 1. General principles and multipurpose test specimens and lengths
Preparation of strip samples
GB/T 19276.1-2003 Determination of the final aerobic biodegradability of the material in aqueous culture solution Determination of closed breathing apparatus
In the method of oxygen demand
GB/T 19276.2-2003 Determination of the final aerobic biodegradability of materials in aqueous medium Using the measured release of dioxins
Carbonization method
Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions according to GB/T 19277.1-2011
Methods for oxidizing carbon Part 1. General methods
Determination of the ultimate aerobic biodegradability of materials under controlled composting conditions according to GB/T 19277.2-2013
Methods for the oxidation of carbon - Part 2. Determination of carbon dioxide released under laboratory conditions by gravimetric analysis
Plastics - Differential scanning calorimetry (DSC) - Part 1. General principles
Plastics - Differential scanning calorimetry (DSC) - Part 3. Determination of temperature and enthalpy of fusion and crystallization GB/T 19466.3-2004
GB/T 22047-2008 Determination of the ultimate aerobic biodegradability of plastic materials in soil using the determination of closed breathing apparatus
The amount of oxygen or the method of measuring the released carbon dioxide […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34255-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34255-2017
$135.00