Valid

GB/T 34187-2017Units and symbols for urban heating (English PDF)

城镇供热用单位和符号

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34187-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 7, 2017

Implementation date

August 1, 2018

Scope

GB/T 34187-2017 is the English-translated version of 城镇供热用单位和符号.

GB/T 34187-2017 is the Chinese standard "Units and symbols for urban heating". Its scope clause reads: This standard specifies the commonly used units and symbols in the field of urban heating.

This standard applies to urban heating industry engineering construction, product manufacturing, document publishing units and symbols. Its clauses include common units and symbols; thermal load q mw [te] mw.

Found what you need?

Document preview — GB/T 34187-2017

National Standard of the People's Republic of China

ICS
91.140.10
Classification
P 46

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 common units and symbols
  • 1 Thermal load Q MW [Te] MW
  • 1.2 The maximum heat load Qmax MW [special] MW
  • 1.3 Real-time heat load Qac MW [Te] MW
  • 1.5 Peak heat load Qp MW [Te] MW
  • 1.7 Heating Load Qh MW [Te] MW
  • 1.8 Ventilation heat load Qv MW [Te] MW
  • 1.9 air-conditioning thermal load Qa MW [special] MW
  • 1.11 production process heat load Qpr MW [special] MW
  • 2.2 Ventilation heat index qv watts [special] per cubic meter W/m3

1 Scope

This standard specifies the commonly used units and symbols in the field of urban heating.

This standard applies to urban heating industry engineering construction, product manufacturing, document publishing units and symbols.

2 common units and symbols

Common units and symbols should be in accordance with the provisions of Table 1.

Table 1 common units and symbols

Number of the name of the amount of symbols unit

Name symbol

Description

1 Thermal load Q MW [Te] MW

Unit heat time users (or with thermal equipment)

Need heat (or heat consumption)

1.1

Design thermal load Qd MW [Te] MW Thermal load under given design conditions

1.2 The maximum heat load Qmax MW [special] MW

Under actual conditions may occur the most heat load

Large value

1.3 Real-time heat load Qac MW [Te] MW

Heat actually occurring at different times in the heating system load 1.4 Basic heat load Qb MW [Te] MW The maximum heat load supplied by the basic heat source

1.5 Peak heat load Qp MW [Te] MW

The basic heat source heating capacity can not be satisfied by the sharp

Peak heat provided, real-time heat load and basic heat

Load balance 1.6 Average Heat Load Qave MW [Te] MW corresponds to the heat load at average outdoor heating temperature

1.7 Heating Load Qh MW [Te] MW

Maintain the heat in the heating room at the required temperature load

1.8 Ventilation heat load Qv MW [Te] MW

Heating the air entering the room from the ventilation system

Heat load

1.9 air-conditioning thermal load Qa MW [special] MW

And air conditioning outdoor computing meteorological parameters corresponding

The heat load 1.10 Domestic hot water heat load Qw MW [Te] MW The heat load required to prepare domestic hot water

1.11 production process heat load Qpr MW [special] MW

Production process, the heat required by the heat equipment load

2 area thermal index q watts [special] per square meter W/m2 unit floor area design heat load 2.1 heating index qh watts [special] per square meter W/m2 heating design area heating load

2.2 Ventilation heat index qv watts [special] per cubic meter W/m3

Peripheral building volume in the unit inside and outside the unit

Ventilation design heat load at design temperature difference […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34187-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34187-2017

$205.00