GB/T 34101-2017Determination of hydrogen sulfide in fuel oils - Rapid liquid phase extraction method (English PDF)
燃料油中硫化氢含量的测定 快速液相萃取法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 34101-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 31, 2017
Implementation date
February 1, 2018
Scope
GB/T 34101-2017 is the English-translated version of 燃料油中硫化氢含量的测定 快速液相萃取法.
GB/T 34101-2017 is the Chinese standard "Determination of hydrogen sulfide in fuel oils - Rapid liquid phase extraction method". Its scope clause reads: This standard specifies the rapid liquid phase extraction method for the determination of hydrogen sulfide fuel oil in the liquid content of the method.
This standard applies to the 50 °C kinematic viscosity of not more than 3000mm2/s of fuel oil, including marine residual fuel, distillate fuel and oil Determination of liquid phase hydrogen sulfide in blending component oil.
This standard includes Method A and Method B two test steps. Note 1. This standard also applies to the determination of 50 °C kinematic viscosity higher than 3000mm2/s samples (see 7.2), but the precision will be affected.
Note 2. Some samples that contain thiol or alkyl sulfide disrupters at levels greater than 5 mg per kilogram (mg/kg), as measured by Method B, will yield Higher hydrogen sulfide content, Method A can be used to eliminate this effect.
Note 3. If the sample contains fatty acid methyl esters, the determination of hydrogen sulfide content has no effect. Warning --- Hydrogen sulfide is a very dangerous, toxic, explosive, colorless and transparent gas that can be found in crude oil.
Hydrogen sulfide can also be refined Fuel oil refinery plant formed during the process, and oil handling, storage and distribution in the release. Low concentrations of hydrogen sulfide gas smell of rotten eggs Road; high concentrations of hydrogen sulfide can cause loss of taste, headache, dizziness, higher concentrations will be fatal.
Hydrogen sulfide is strongly recommended Should be aware of the hazards of hydrogen sulfide gas and be able to take appropriate steps to prevent exposure to toxic gases. Its clauses include method summary; equipment.
Found what you need?
Document preview — GB/T 34101-2017
National Standard of the People's Republic of China
- ICS
- 75.160.20
- Classification
- E 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Method summary
- 4 equipment
- 5 Reagents and materials
- 6 sample
- 7 Sample Preparation
- 8 Instrument Preparation
- 9 calibration
- 10 calibration
- 11 Test Procedure
- 12 Results Calculation
- 13 results indicate
- 14 precision
- 15 Test Report
- Appendix A (Normative) Hydrogen sulfide measuring apparatus
1 Scope
This standard specifies the rapid liquid phase extraction method for the determination of hydrogen sulfide fuel oil in the liquid content of the method.
This standard applies to the 50 °C kinematic viscosity of not more than 3000mm2/s of fuel oil, including marine residual fuel, distillate fuel and oil
Determination of liquid phase hydrogen sulfide in blending component oil. This standard includes Method A and Method B two test steps.
Note 1. This standard also applies to the determination of 50 °C kinematic viscosity higher than 3000mm2/s samples (see 7.2), but the precision will be affected.
Note 2. Some samples that contain thiol or alkyl sulfide disrupters at levels greater than 5 mg per kilogram (mg/kg), as measured by Method B, will yield
Higher hydrogen sulfide content, Method A can be used to eliminate this effect.
Note 3. If the sample contains fatty acid methyl esters, the determination of hydrogen sulfide content has no effect.
Warning --- Hydrogen sulfide is a very dangerous, toxic, explosive, colorless and transparent gas that can be found in crude oil. Hydrogen sulfide can also be refined
Fuel oil refinery plant formed during the process, and oil handling, storage and distribution in the release. Low concentrations of hydrogen sulfide gas smell of rotten eggs
Road; high concentrations of hydrogen sulfide can cause loss of taste, headache, dizziness, higher concentrations will be fatal. Hydrogen sulfide is strongly recommended
Should be aware of the hazards of hydrogen sulfide gas and be able to take appropriate steps to prevent exposure to toxic gases.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 4756 Petroleum liquids - Manual sampling method
3 Method summary
A sample of known mass is injected into the heated test tube containing the diluted base oil. Bubbling the air into the sample fluid, which was extracted
Hydrogen sulfide gas. The blown hydrogen sulfide, along with the air, enters the detector through a filter box (Method A only) cooled to -20 ° C,
The hydrogen sulfide content in the air was measured to calculate the hydrogen sulfide content in the sample liquid phase. In method B, the cryogenic filtration is omitted
Box related steps.
4 equipment
4.1
hydrogen sulfide determination instrument see Appendix A. Method A instruments include a gas phase processor, method B does not contain a gas phase processor.
4.2 Analysis Balance
Single or double plate, a sense of the amount of 0.001g.
4.3 Syringe or burette
20 mL for injection of diluent oil (5.1) with ± 1% accuracy.
4.4
pipette capacity of 1mL, used to join the sample. The accuracy should not exceed the error of 1000 mL as instructed by the instrument manufacturer
± 0.25%, coefficient of variation of 0.04%. In order to optimize the operation of the system, it is recommended to use the manufacturer's model pipette.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 34101-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 34101-2017
$235.00