Valid

GB/T 34099-2017Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil—Inductively coupled plasma emission spectrometry method (English PDF)

残渣燃料油中铝、硅、钒、镍、铁、钠、钙、锌及磷含量的测定 电感耦合等离子发射光谱法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 34099-2017 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 31, 2017

Implementation date

February 1, 2018

Scope

GB/T 34099-2017 is the English-translated version of 残渣燃料油中铝、硅、钒、镍、铁、钠、钙、锌及磷含量的测定 电感耦合等离子发射光谱法.

GB/T 34099-2017 is the Chinese standard "Determination of aluminium, silicon, vanadium, nickel, iron, sodium, calcium, zinc and phosphorus in residual fuel oil—Inductively coupled plasma emission spectrometry method".

Its scope clause reads: This standard specifies the determination of aluminum, silicon, vanadium, iron, nickel, sodium, calcium, zinc and phosphorus in the residual fuel oil by inductively coupled plasma atomic emission spectrometry Content analysis method.

This standard applies to residual fuel oil, the determination of various elements in Table 1.

Table 1 measurement range Elemental mass fraction range/(mg/kg) Al 5 ~ 150 Si 10 ~ 250 V 1 ~ 400 Ni 1 ~ 100 Fe 2 ~ 60 Na 1 ~ 100 Ca 3 ~ 100 Zn 1 to 70 P 1 ~ 60 If the sulfur content of the residual fuel oil is greater than 0.3%, sulfur is not required as an ashing aid in sample preparation.

Chapter 10 In the precision data is derived from the fuel oil sulfur content greater than 0.3%.

There is a certain correlation between the aluminum content and the silicon content in the residual fuel oil, depending on the content of aluminum or silicon or the content of both elements The content of the catalyst powder in the residual fuel oil can be estimated.

Found what you need?

Document preview — GB/T 34099-2017

National Standard of the People's Republic of China

ICS
75.160.20
Classification
E 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references

1 Scope

This standard specifies the determination of aluminum, silicon, vanadium, iron, nickel, sodium, calcium, zinc and phosphorus in the residual fuel oil by inductively coupled plasma atomic emission spectrometry

Content analysis method.

This standard applies to residual fuel oil, the determination of various elements in Table 1.

Table 1 measurement range

Elemental mass fraction range/(mg/kg)

Al 5 ~ 150

Si 10 ~ 250

V 1 ~ 400

Ni 1 ~ 100

Fe 2 ~ 60

Na 1 ~ 100

Ca 3 ~ 100

Zn 1 to 70

P 1 ~ 60

If the sulfur content of the residual fuel oil is greater than 0.3%, sulfur is not required as an ashing aid in sample preparation. Chapter 10

In the precision data is derived from the fuel oil sulfur content greater than 0.3%.

There is a certain correlation between the aluminum content and the silicon content in the residual fuel oil, depending on the content of aluminum or silicon or the content of both elements

The content of the catalyst powder in the residual fuel oil can be estimated.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 4756 Petroleum liquids - Manual sampling method

Laboratory use specifications and test methods for analysis GB/T 6682-2008

Laboratory glassware measuring cylinder […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 34099-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 34099-2017

$205.00