GB/T 33942-2017Guidelines for the preparation of emergency response plan for special equipment accident (English PDF)
特种设备事故应急预案编制导则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33942-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 12, 2017
Implementation date
February 1, 2018
Scope
GB/T 33942-2017 is the English-translated version of 特种设备事故应急预案编制导则.
GB/T 33942-2017 is the Chinese national guideline for writing the emergency response plan for a special equipment accident.
It sets the preparation procedure - starting with the setting up of an emergency preparedness working group under the leadership of the person principally responsible for the unit - and the main contents, format and requirements of the plan.
It defines special equipment (boilers, pressure vessels including cylinders, pressure pipelines, lifts, hoisting machinery, passenger ropeways, large amusement rides and special motor vehicles used inside a site or plant, plus any other special equipment named by law), special equipment risk assessment, the accident emergency plan and the emergency drill.
Four informative annexes give the formulation and requirements of the plan, the accident classification and early-warning criteria, a list of emergency rescue equipment and a drill record form; accident reporting, investigation and handling follow TSG 03.
It applies to the emergency planning of units that install, repair, alter, fill, operate, use or inspect special equipment. Issued on 12 July 2017, it has applied since 1 February 2018.
Found what you need?
Document preview — GB/T 33942-2017
National Standard of the People's Republic of China
- ICS
- 13.100
- Classification
- J 09
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 preparation procedure
- 5 contingency plan main content
- Appendix A (Informative Appendix) Formulation and Requirements for Emergency Preparedness Plan for Special Equipment Accident
- Appendix B (informative) Standard for accident classification and early warning of special equipment
- Appendix C (Informative Appendix) List of Special Equipment Accident Emergency Rescue Equipment
- Appendix D (Informative Appendix) Special Equipment Accident Emergency Walkthrough Record Table
- Reference
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the preparation procedures, main contents, format and requirements of the special equipment contingency plan (hereinafter referred to as the "emergency plan").
This standard applies to special equipment installation, repair, renovation, filling, operation, use, testing units (hereinafter referred to as "units") special equipment Emergency Preparedness Plan Work.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
TSG 03 special equipment accident reporting and investigation and handling guidelines
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Special equipment
Boilers, pressure vessels (including cylinders), pressure pipelines, elevators, hoisting machines, passenger ropeways, Large amusement facilities, field (plant) within the special motor vehicles, as well as legal and administrative regulations of other special equipment.
3.2 Special equipment risk assessment
To induce special equipment accidents based on a variety of factors to influence factors into the possibility of various types of accidents as a condition to the consequences of the accident The comprehensive loss caused by the assessment of various types of special equipment to make the safety of risk identification, analysis and evaluation.
3.3 Special equipment accident emergency plan
For the prevention and control of special equipment may occur accidents, to minimize the possibility of special equipment accidents and their possible Cause damage to the pre-established work program.
3.4 Special equipment accident emergency drills
For the special equipment may occur in the accident scene, according to the special equipment accident contingency plans and simulated emergency activities.
4 Preparation procedures
4.1 Establishment of Emergency Preparedness Working Group
4.1.1 Leadership and organization
The establishment of the unit is mainly responsible for the leadership, the relevant departments or personnel composed of emergency preparedness working group.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33942-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TSG 03-2024 — Guideline for Reporting, Investigation and Handling of Special Equipment Accident
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 33942-2017
$235.00