GB/T 33845-2017Technical requirements for access network—Gigabit-capable passive optical network (GPON) (English PDF)
接入网技术要求 吉比特的无源光网络(GPON)
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33845-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 31, 2017
Implementation date
September 1, 2017
Scope
GB/T 33845-2017 is the English-translated version of 接入网技术要求 吉比特的无源光网络(GPON).
GB/T 33845-2017 is the Chinese standard "Technical requirements for access network—Gigabit-capable passive optical network (GPON)".
Its scope clause reads: This standard specifies that the Transport Aggregation (TC) layer uses the GPON encapsulation mode (GEM) of the Gigabit Ethernet Passive Optical Network (GPON) system Reference model, device functional structure, optical network requirements, service carrying capacity and performance indicators, service interface type, PON interface, function and association Negotiation, protection and safety, bearer synchronization signal, operation and maintenance management and equipment electrical safety requirements.
This standard applies to the public telecommunications network environment GPON equipment, special telecommunications network can also refer to the use. Its clauses include normative reference documents.
Found what you need?
Document preview — GB/T 33845-2017
National Standard of the People's Republic of China
- ICS
- 33.040.50
- Classification
- M 42
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 acronym
- 5 System parameter configuration and function reference model
- 5.1 System Reference Configuration
- 5.2 protocol stack
- 5.3 Function module
- 5.3.1 OLT function module
- 5.3.2 ONU function module
- 6 Optical network requirements
- 6.1 Wavelength
- 6.2 transmission bit rate
- 6.3 Transmission distance and shunt ratio
- 7 Business carrying capacity and equipment type
- 7.1 Business carrying capacity
- 7.2 OLT Device Type
- 7.3 ONU device type
- 8 network side and user side interface
- 8.1 Interface Type Requirements
- 8.2 Network side and user side interface requirements
- 8.2.1 GE interface
- 8.2.2 10/100BASE-T interface
- 8.2.3 10GB ASE-X interface
- 8.2.4 STM-1 interface
- 8.2.5 E1 interface
- 8.2.6 Z interface
- 8.2.7 Za interface
- 8.2.8 ADSL2 interface
- 8.2.9 VDSL2 interface
- 8.3 Business-related agreement requirements
- 8.3.1 H.248 protocol
- 8.3.2 MGCP protocol
- 8.3.3 SIP protocol
- 9 GPON line side requirements
- 9.1 PMD requirements
- 9.2 GTC requirements
- 10.1 System functional requirements
- 10.1.1 Dynamic Bandwidth Allocation (DBA)
- 10.1.2 Service QoS
- 10.1.2.1 Basic requirements
- 10.1.2.2 Service flow classification
- 10.1.2.2.1 OLT traffic classification
- 10.1.2.2.2 Traffic classification of ONUs
- 10.1.2.3 Priority marking mode
- 10.1.2.3.1 Priority marking mode for OLT
- 10.1.2.3.2 Priority marking mode for ONUs
- 10.1.2.4 Queue Scheduling
- 10.1.2.4.1 Queue Scheduling for OLT
- 10.1.2.4.2 Queue Scheduling for ONUs
- 10.1.2.5 Speed limit function
- 10.1.2.5.1 Limits of OLT
- 10.1.2.5.2 Speed limit of ONU
- 10.1.3 ONU authentication
- 10.1.4 encryption function
- 10.2 Ethernet Functions
- 10.2.1 Layer 2 forwarding function
- 10.2.1.1 Layer 2 forwarding function of OLT
- 10.2.1.2 Layer 2 forwarding function of ONU
- 10.2.2 Layer 2 aggregation function
- 10.2.3 Layer 2 isolation function
- 10.2.4 VLAN
- 10.2.4.1 VLAN Function of OLT
- 10.2.4.2 VLAN Function of ONU
- 10.2.5 VLAN Stacking
- 10.2.6 security attack function
- 10.2.6.1 Frame filtering function
- 10.2.6.1.1 Frame filtering function of OLT
- 10.2.6.1.2 Frame filtering function for ONUs
- 10.2.6.2 Multicast/Broadcast/DLF Message Storm Suppression
- 10.2.6.3 MAC Address Learning Limitations
- 10.2.6.3.1 MAC address learning limit for OLT
- 10.2.6.3.2 MAC address learning limit for ONU
- 10.2.6.4 Prevent MAC Address Spoofing
- 10.2.6.5 User Port Identification Function
- 10.2.7 Port self-negotiation
- 10.2.8 Flow control function
- 10.2.9 Rapid Spanning Tree Function (RSTP)
- 10.2.10 Multicast function
- 10.2.10.1 Basic requirements
- 10.2.10.2 Multicast function of OLT
- 10.2.10.3 Multicast function of ONU
- 10.2.11 Link aggregation
- 10.3 VoIP related functions
- 11 PON protection
- 11.1 Basic principles
- 11.2 Protection switching mode
1 Scope
This standard specifies that the Transport Aggregation (TC) layer uses the GPON encapsulation mode (GEM) of the Gigabit Ethernet Passive Optical Network (GPON) system
Reference model, device functional structure, optical network requirements, service carrying capacity and performance indicators, service interface type, PON interface, function and association
Negotiation, protection and safety, bearer synchronization signal, operation and maintenance management and equipment electrical safety requirements.
This standard applies to the public telecommunications network environment GPON equipment, special telecommunications network can also refer to the use.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 7611-2001 Digital network series Bit rate Electrical interface characteristics
GB 9254 Radio disturbance limits and measurement methods for information technology equipment
GB/T 9771 (all parts) single mode fiber for communication series
Information technology equipment - Immunity limits and methods of measurement GB/T YD/T 1054-2000 access network technical requirements --- integrated digital loop carrier (IDLC)
YD/T 1082-2000 access network equipment over-voltage over-current protection and basic environmental adaptability technical conditions
Technical requirements for integrated access equipment based on softswitch YD/T YD/T 1522.1-2006 Session Initiation Protocol (SIP) Technical Requirements Part 1. Basic Session Initiation Protocol
YD/T 1522.2-2006 Session Initiation Protocol (SIP) Technical Requirements Part 2. Session Initiation Protocol (SIP) -based calls
Control of the application
YD/T 1522.5-2006 Session Initiation Protocol (SIP) Technical Requirements Part 5. SIP Protocol for Unified IMS Networks
YD/T 1530-2006 access network technical requirements - spectrum expansion of the second generation of asymmetric digital subscriber line (ADSL2)
General view of broadband optical access network YD/T 1619-2007
Technical Requirements for Access Network - Gibbent Passive Optical Network (GPON) Part 2. Physical Media
Related (PMD) layer requirements
Technical Requirements for Access Network - Gibbent Passive Optical Network (GPON) Part 3. Transmission Aggregation (TC) layer requirements
YD/T 1949.4-2011 Access Network Technical Requirements - Gigabit Ethernet Passive Optical Network (GPON) Part 4. ONT Management
Control interface (OMCI) requirements
YD/T 2276-2011 access network technical requirements EPON/GPON system carrying TDM business
YD/T 2676-2013 access network technology requirements PON system bearer frequency synchronization and time synchronization
ITU-TG.707 Network node interface for synchronous digital series (SDH) (Networknodeinterfaceforthe synchronousdigitalhierarchy
ITU-TG.711-1998 Pulse Code Modulation of Speech Frequency [Pulsecodemodulation (PCM) ofvoicefrequencies]
ITU-TG.723.1-1996 Dual-rate speech coder for multimedia communication at 5.3 kbit/s and 6.3 kbit/s (Dualratespeechcoderformultimediacommunicationstransmittingat 5.3 and 6.3 kbit/s) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 7611-2001Characteristic of the electrical interface at hierarchical bit rate for digital network
- YD/T 1082-2000Technical requirements and test methods for the protection against overvoltages and overcurrents on access network equipment
- YD/T 1522.1-2006Technical Requirements for Session Initiation Protocol. Part 1: Basic Session Initiation Protoc
- YD/T 1522.2-2006Technical Requirements for Session Initiation Protocol Part 2: Applications about call control based on SIP
- YD/T 1522.5-2006Technical requirements for session initiation protocol. Part 5: Session initiation protocol based on the unified IMS
- YD/T 1530-2006Technical Requirements For Access Network Extended bandwidth 2nd-generation Asymmetric Digital Subscriber Line(ADSL2+)
GB 9254 · GB/T 9771 · GB/T 17618 · YD/T 1054-2000 · YD/T 1385-2005 · ITU-T G.707 · ITU-T G.711-1998 · ITU-T G.723.1-1996
Similar standards
How to Download GB/T 33845-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 9771.1-2008 — Single-mode optical fibres for telecommunication -- Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 9771.1-2020 — Single-mode optical fibres for telecommunication—Part 1: Characteristics of a dispersion unshifted single-mode optical fibre
GB/T 9771.2-2020 — Single-mode optical fibres for telecommunication—Part 2: Characteristics of a cut-off wavelength shifted single-mode optical fibre
Secure payment via Stripe
Payments accepted
GB/T 33845-2017
$385.00