GB/T 33764-2017Acceptance specification of stand-alone photovoltaic (PV) system (English PDF)

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies the basic requirements for system installation, acceptance procedures and safety checks for stand-alone PV systems.

This standard applies to the system power of 1kW and above the ground with independent photovoltaic system acceptance.

Note: System power is the sum of the maximum power of the PV modules used under ground standard test conditions.

2 Normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.

GB/T 2828.1 Sampling inspection procedures Part 1: Batch inspection sampling plan for retrieval by quality limit (AQL)

GB/T 9535 Design and identification of crystalline silicon photovoltaic modules for ground use

GB/T 13337.1 Fixed - type exhaust gas - acid batteries - Part 1: Technical conditions

GB/T 15142-2011 Batteries and batteries with alkaline or other acidic electrolytes Square exhaust type Cadmium nickel monomer battery

GB/T 18210 Field measurement of crystalline silicon photovoltaic (PV) IV

GB/T 18911 Design and identification of thin - film PV modules for ground use

GB/T 19638.2-2014 Fixed VRLA batteries - Part 2: Product specifications and specifications

GB/T 20047.1 Safety identification of photovoltaic (PV) components - Part 1: Structural requirements

GB/T 22473-2008 Lead - acid batteries for energy storage

GB 50009 Specification for load of building structures

GB 50054 Code for design of low voltage distribution

GB 50172 Specification for construction and acceptance of batteries for installation of electrical installations

GB 50202 Code for acceptance of construction quality of foundation and construction of building foundation

GB 50205 Code for acceptance of construction quality of steel structure engineering

DL 5027 Typical fire protection procedures for power equipment

YD/T 799-2010 Standard Specification for VRLA Batteries for Communication

IEC 60891:2009 Photovoltaic device - Determination of temperature and irradiance of IV characteristics Calibration procedures (Photovoltaicde-vices-proceduresfortemperatureandirradiancecorrectionstomeasuredI-Vcharacteristics)

IEC 61215-1:2016 Design and identification of ground photovoltaic modules - Part 1: Test requirements [Terrestrialphotovoltaic (PV) modules-Designqualificationandtypeapproval-Part 1. Testrequirements (Edition 1.0)]

IEC 61646:2008 Design and identification of thin film PV modules for the ground [Thin-filmterrestrialphotovoltaic (PV) modules-Designqualificationandtypeapproval (Edition 2.0)]

IEC 61730-1 Evaluation of the safety of photovoltaic modules - Part 1: Structural requirements [Photovoltaic (PV) modulesafety qualification-Part 1. Requirementsforconstruction (Edition1.2)]

IEC 61730-2:2012 Safety assessment of photovoltaic modules - Part 2: Test procedures [Photovoltaic (PV) modulesafety qualification-Part 2. Requirementsfortesting (Edition1.1)]