GB/T 33740-2017Mobile payment—Test methods of contactless radio frequency interface based on 2.45GHz range controlled communication technology (English PDF)
手机支付 基于2.45GHz RCC（限域通信）技术的非接触射频接口测试方法
This is a limited preview
Buy now to download the full PDF (72 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33740-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 12, 2017
Implementation date
December 1, 2017
Scope
GB/T 33740-2017 is the English-translated version of 手机支付 基于2.45GHz RCC（限域通信）技术的非接触射频接口测试方法.
GB/T 33740-2017 gives the test methods for the contactless radio frequency interface of mobile payment based on 2.45 GHz range controlled communication.
It covers the physical layer test: test object, environment, default tolerances, the configurations for the initiator magnetic channel, the responder magnetic channel and the RF channel, and items such as data encoding symbol rate, magnetic field signal strength and threshold, symbol period jitter, transmit power, frequency tolerance, modulation parameters and in-band spurious emission.
The protocol test follows, for responder and initiator: activation, connection, data exchange, link maintenance, closing the connection, collision handling, channel binding, timeout, encryption algorithm validation and frequency range.
Three annexes give the standard induction coil, the derivation of induced voltage and field strength, and the test order. It cites GB/T 33736-2017, was issued on 12 May 2017 and has applied since 1 December 2017.
Found what you need?
Document preview — GB/T 33740-2017
National Standard of the People's Republic of China
- ICS
- 33.050.99
- Classification
- M 32
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 symbols and abbreviations
- 5.1 Test Object
- 5.2 Test Environment
- 5.3 The default allowable error
- 5.4 physical layer test configuration
- 5.4.1 initiator magnetic channel test configuration
- 5.4.2 Response Party Magnetic Channel Test Configuration
- 5.4.3 Initiator/Responder RF Channel Test Configuration
- 5.5 Initiator Magnetic Channel Test Item
- 5.5.1 Data Encoding Symbol Rate Test
- 5.5.2 Magnetic field signal strength test
- 5.5.3 Magnetic Field Signal Symbol Period Jitter Test
- 5.6 Response Party Magnetic Channel Test Item
- 5.6.1 Magnetic field signal strength threshold test
- 5.7 Initiator/Responder RF Channel Test Item
- 5.7.1 Transmit Power Test
- 5.7.2 Frequency tolerance test
- 5.7.3 Modulation parameters test
- 5.7.4 In-band spurious test
- 6 protocol test
- 6.1 Test Object
- 6.2 Test Environment
- 6.3 Default allowable error
- 6.4 Protocol Tester
- 6.5 RFU domain
- 6.6 Test Command
- 6.7 Protocol Test Configuration
- 6.7.1 Responder Protocol Test Configuration
- 6.7.2 Initiator Protocol Test Configuration
- 6.8 Responder Protocol Test Item
- 6.8.1 Activating the test
- 6.8.2 Connection Test
- 6.8.3 Data exchange test
- 6.8.4 Link Maintenance Test
- 6.8.5 Close the connection test
- 6.8.6 Conflict Mechanism Testing
- 6.8.7 Channel Binding Test
- 6.8.8 Timeout Test
- 6.8.9 Encryption Algorithm Validation
- 6.8.10 frequency range test
- 6.9 Initiator Agreement Test Item
- 6.9.1 Activating the test
- 6.9.2 Connection Test
- 6.9.3 Data exchange test
- 6.9.4 Link Maintenance Test
- 6.9.5 Close the connection test
- 6.9.6 Exception Handling Test
- 6.9.7 Timeout Test
- 6.9.8 Encryption Algorithm Validation
- 6.9.9 Frequency Range Test
- Appendix A (Normative) Standard induction coil
- Appendix B (Informative) Derivation of magnetic channel induced voltage and field strength
- Appendix C (Normative) Test Order
Foreword
This standard is based on 2.45GHzRCC (limited area communication) technology, and based on 13.56MHz and 2.45GHz dual-band technology phone Pay one of the series of standards. This series of standards is expected to include.
--- Mobile payment based on 2.45GHzRCC (limited communication) technology non-contact RF interface technology requirements;
--- Mobile payment based on 2.45GHzRCC (limited communication) technology, smart card technology requirements;
--- Mobile payment based on 2.45GHzRCC (limited communication) technology non-contact reader terminal technical requirements;
--- Based on 13.56MHz and 2.45GHz dual-band wireless contactless reader technology interface requirements;
--- mobile payment based on 2.45GHzRCC (limited area communication) technology non-contact RF interface test method;
--- Mobile payment based on 2.45GHzRCC (limited communication) technology smart card test methods;
--- mobile payment based on 2.45GHzRCC (limited communication) technology non-contact reader terminal test method;
--- Based on 13.56MHz and 2.45GHz dual-band technology non-contact reader RF interface test method.
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
1 Scope
This standard specifies the test method of non-contact radio frequency interface based on 2.45GHzRCC (limited area communication) technology, including physical layer, number According to the link and transmission session protocol layer test environment, test methods and procedures and so on.
This standard applies to non-contact radio frequency interface protocol compliance test based on 2.45GHzRCC (limited area communication) technology.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 33736-2017 mobile payment non-contact radio frequency interface technology requirements based on 2.45GHzRCC (limited area communication) technology
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Limited communication
Communication distance range controllable wireless proximity communication technology.
3.2 Initiator
2.45GHz mobile payment system distance control communication initiated by the order request party.
3.3 Responder
2.45GHz mobile payment system to respond to the order request to communicate.
3.4 Access identifier
Used to identify different access response sessions.
3.5 Multiple responder collisions
Multiple responders are located within the accessible range of the same initiator, and the initiator randomly selects any one of the responders for access Users can not intuitively determine the respondents are accessed, resulting in the transaction with the uncertainty.
3.6 Collision detection code
Identifier for collision detection.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 72 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download GB/T 33740-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 33736-2017 — Mobile payment—Technical requirements for contactless radio frequency interface based on 2.45GHz range controlled communication technology
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
Secure payment via Stripe
Payments accepted
GB/T 33740-2017
$1,200.00