GB/T 3356-2014Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials (English PDF)
定向纤维增强聚合物基复合材料弯曲性能试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 3356-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 24, 2014
Implementation date
January 1, 2015
Scope
GB/T 3356-2014 is the English-translated version of 定向纤维增强聚合物基复合材料弯曲性能试验方法.
GB/T 3356-2014 is the Chinese standard "Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials". Its scope clause reads: This standard specifies the test equipment directional fiber polymer matrix composites flexural properties of the sample, the test procedure, computing and experiment report.
This standard applies to continuous fiber reinforced polymer matrix composites Laminates bending performance measurement, also applicable to other complex polymer matrix Determination of bending properties of composite materials.
Its clauses include terms and definitions; principle of the method; test equipment.
Found what you need?
Document preview — GB/T 3356-2014
National Standard of the People's Republic of China
- ICS
- 83.120
- Classification
- Q 23
- Replacing
- GB/T 3356-1999
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 principle of the method
- 5 Test Equipment
1 Scope
This standard specifies the test equipment directional fiber polymer matrix composites flexural properties of the sample, the test procedure, computing and experiment report.
This standard applies to continuous fiber reinforced polymer matrix composites Laminates bending performance measurement, also applicable to other complex polymer matrix
Determination of bending properties of composite materials.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1446 Test methods for fiber reinforced plastic properties General
GB/T 3961 fiber reinforced plastics
3 Terms and Definitions
Terms and definitions GB/T 3961 defined apply to this document.
4 principle of the method
Polymer-based fiber-reinforced composite laminates straight specimens, three-point or four-point bending method for bending load is applied in the sample
Central or middle part of the formation of bending stress distribution field test laminate bending performance.
5 Test Equipment
5.1 test machine and test equipment
Test machine and test equipment shall comply with GB/T 1446's.
5.2 environmental chamber
Precision environmental control box shall meet the test requirements, the verification of qualified and used in the period.
5.3 Loading head with the bearing
5.3.1 Overview
Radius Radius loading head and the seat of 3mm, to 0 ° unidirectional fiber-reinforced composite laminate sample loading head and bearing recoverable
By 5mm. Recommended load bearing head and a hardness of HRC40 ~ 45. Loading method is divided into A (three-point bending) and B (four-point bending method).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 3356
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 3356-2014 | Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials | current edition | Current |
| GB/T 3356-1999 | Test method for flexural properties of orientational fiber reinforced polymer metrix composite materials | previous edition | Superseded |
This page sells the current edition, GB/T 3356-2014. Earlier editions are listed for reference only.
How to Download GB/T 3356-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 3356-2014
$135.00