GB/T 33465-2016Determination of chlorine and silicon in gasoline by inductively coupled plasma optical emission spectrometry (ICP-OES) (English PDF)
电感耦合等离子体发射光谱法测定汽油中的氯和硅
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33465-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 30, 2016
Implementation date
July 1, 2017
Scope
GB/T 33465-2016 is the English-translated version of 电感耦合等离子体发射光谱法测定汽油中的氯和硅.
GB/T 33465-2016 is the Chinese standard "Determination of chlorine and silicon in gasoline by inductively coupled plasma optical emission spectrometry (ICP-OES)".
Its scope clause reads: This standard specifies the method for the determination of chlorine and silicon in gasoline by inductively coupled plasma emission spectrometry (ICP-OES).
This standard applies to the determination of vehicle gasoline, M15 car methanol gasoline, M30 vehicle methanol gasoline and E10 car ethanol gasoline in the total chlorine And total silicon content.
This standard applies to the determination of chlorine content range of 10mg/kg ~ 10000mg/kg of gasoline, silicon content range of 1mg/kg ~ 1000mg/kg of gasoline, beyond this range can also be measured by the method, precision is not investigated.
This standard does not apply to the determination of insoluble particles containing samples. If the particles are very small (less than 1µm), they will be brought into The ions are involved in quantitative analysis.
If the sample contains a volatile form of chlorine compounds, the use of Appendix A determination. If the sample contains a volatile compound of silicon compounds, the use of Appendix B determination.
If the sample contains tetramethylsilane, this standard is measured The result will be higher than the real value. Its clauses include normative reference documents; summary of methods.
Found what you need?
Document preview — GB/T 33465-2016
National Standard of the People's Republic of China
- ICS
- 75.160.20
- Classification
- E 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Summary of methods
- 4 method application
- 5 interference factor
- 7 Reagents and Materials
- 8 Sampling
- 9 Instrument preparation
- 10 Preparation of internal standard solution (optional)
- 11 Preparation of standard solution and sample solution
- 12 Test Procedure
- 13 Results Calculate
- 14 precision
- 15 Test Report
- Appendix A (normative) Determination of chlorine content in petrol (containing volatile compounds in chlorine)
1 Scope
This standard specifies the method for the determination of chlorine and silicon in gasoline by inductively coupled plasma emission spectrometry (ICP-OES).
This standard applies to the determination of vehicle gasoline, M15 car methanol gasoline, M30 vehicle methanol gasoline and E10 car ethanol gasoline in the total chlorine
And total silicon content.
This standard applies to the determination of chlorine content range of 10mg/kg ~ 10000mg/kg of gasoline, silicon content range of
1mg/kg ~ 1000mg/kg of gasoline, beyond this range can also be measured by the method, precision is not investigated.
This standard does not apply to the determination of insoluble particles containing samples. If the particles are very small (less than 1µm), they will be brought into
The ions are involved in quantitative analysis.
If the sample contains a volatile form of chlorine compounds, the use of Appendix A determination.
If the sample contains a volatile compound of silicon compounds, the use of Appendix B determination. If the sample contains tetramethylsilane, this standard is measured
The result will be higher than the real value.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
Petroleum liquid manual sampling method GB/T 4756
GB/T 17476 Additive elements used in lubricating oils, abrasive metals and contaminants, and certain elements in base oil
Inductively coupled plasma emission spectroscopy)
GB 18350 denatured fuel ethanol
GB/T 23510 Vehicle Fuel Methanol
ASTM D4806 Standard Specification for Denatured Fuel Ethanol Mixed with Gasoline for Automotive Spark Ignition Engine Fuel (Standardspecificationfordenaturedfuelethanolforblendingwithgasolinesforuseasautomotive spark-ignitionenginefuel
ASTMD4814 Standard Specification for Ignition Engine Fuel (Standardspecification forautomotivespark- ignitionenginefuel
ASTMD5798 Standard Specification for Ethanol Fuel for Automotive Spark Ignition Engines (Standardspecificationforethanol fuelblendsforflexible-fuelautomotivespark-ignitionengines
3 Summary of methods
Accurately take a well-mixed sample dilution with a diluent and prepare the standard solution in the same way. In order to compensate for
Sample introduction effect caused by a variety of errors, you can choose an internal standard element added to the sample solution (internal standard method can be used). Will dissolve […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 33465-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 33465-2016
$205.00