Valid

GB/T 33400-2016Determination of total contamination in middle distillates, diesel fuels andDetermination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters (English PDF)

中间馏分油、柴油及脂肪酸甲酯中总污染物含量测定法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 33400-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 23, 2016

Implementation date

December 23, 2016

Scope

GB/T 33400-2016 is the English-translated version of 中间馏分油、柴油及脂肪酸甲酯中总污染物含量测定法.

GB/T 33400-2016 is the Chinese standard "Determination of total contamination in middle distillates, diesel fuels andDetermination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters".

Its scope clause reads: This standard specifies the total distillate oil, fatty acid methyl ester volume fraction of not more than 30% of diesel and pure fatty acid methyl ester (BD100) in the total Determination of pollutant content.

This standard applies to 20 °C kinematic viscosity of not more than 8mm2/s, or 40 °C kinematic viscosity of not more than 5mm2/s samples, such as wood Oil and pure fatty acid methyl ester (BD100).

This standard applies to samples with a total contaminant content of 12 mg/kg to 30 mg/kg and provides for Precision; also applies to the total pollutant content beyond the scope of the sample, but its precision is not specified.

This standard can also be used to determine fatty acids Methyl ester volume fraction greater than 30% diesel and kinematic viscosity beyond the scope of the product, but the precision of the method is not determined.

Note 1. Excessive contaminants in the fuel system can cause filter blockage and/or hardware failure and therefore do not meet the needs of the user. Note 2.

This standard in the determination of pure fatty acid methyl ester in the total contaminant content of the measured results and the relevant standards there is a big difference, see Appendix A. Its clauses include normative reference documents; terms and definitions; method summary.

Found what you need?

Document preview — GB/T 33400-2016

National Standard of the People's Republic of China

ICS
75.160.20
Classification
E 31

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 terms and definitions
  • 4 Method summary

1 Scope

This standard specifies the total distillate oil, fatty acid methyl ester volume fraction of not more than 30% of diesel and pure fatty acid methyl ester (BD100) in the total

Determination of pollutant content.

This standard applies to 20 °C kinematic viscosity of not more than 8mm2/s, or 40 °C kinematic viscosity of not more than 5mm2/s samples, such as wood

Oil and pure fatty acid methyl ester (BD100). This standard applies to samples with a total contaminant content of 12 mg/kg to 30 mg/kg and provides for

Precision; also applies to the total pollutant content beyond the scope of the sample, but its precision is not specified. This standard can also be used to determine fatty acids

Methyl ester volume fraction greater than 30% diesel and kinematic viscosity beyond the scope of the product, but the precision of the method is not determined.

Note 1. Excessive contaminants in the fuel system can cause filter blockage and/or hardware failure and therefore do not meet the needs of the user.

Note 2. This standard in the determination of pure fatty acid methyl ester in the total contaminant content of the measured results and the relevant standards there is a big difference, see Appendix A.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Petroleum liquid manual sampling method GB/T 4756

GB/T 15724 laboratory glass instrumentation beaker

Automatic sampling of oil and liquid pipelines GB/T EN14275 Automotive fuels Gasoline and diesel quality assessment Refueling guns and petrol stage sampling method (Automotivefuels-As- sessmentofpetrolanddieselfuelquality-Samplingfromretailsitepumpsandcommercialsitefuel dispensers

3 terms and definitions

The following terms and definitions apply to this document.

3.1 Total contaminant

The insoluble matter retained on the filter after filtration under test conditions.

3.2 Absolute pressure

Relative to zero pressure or absolute vacuum pressure.

4 Method summary

A certain amount of the sample was weighed and filtered under vacuum in a pre-weighed filter. The filter of the residue was washed, dried and weighed.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 33400-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 33400-2016

$205.00