GB/T 33338-2016Test methods of twist for dipped yarns and cords (English PDF)
浸胶纱线、线绳和帘线捻度试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 33338-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 13, 2016
Implementation date
July 1, 2017
Scope
GB/T 33338-2016 is the English-translated version of 浸胶纱线、线绳和帘线捻度试验方法.
GB/T 33338-2016 is the Chinese standard "Test methods of twist for dipped yarns and cords". Its scope clause reads: This standard specifies the test method for the determination of dipped yarns, cord and cord twist made of chemical fiber or inorganic fiber material.
This standard applies to the determination of dipped yarns, cord and cord twist, and other non-dipped yarns, cord and cord twist can also be measured According to the implementation.
Its clauses include normative reference documents; test principle; instruments and tools; test general.
Found what you need?
Document preview — GB/T 33338-2016
National Standard of the People's Republic of China
- ICS
- 83.140.99
- Classification
- G 47
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 test principle
- 4 instruments and tools
- 5 Test General
1 Scope
This standard specifies the test method for the determination of dipped yarns, cord and cord twist made of chemical fiber or inorganic fiber material.
This standard applies to the determination of dipped yarns, cord and cord twist, and other non-dipped yarns, cord and cord twist can also be measured
According to the implementation.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 6529 Standard atmosphere for textiles for humidity control and testing
Representation and Judgment of Numerical Correction Rule and Limit Value of GB/T 8170
3 test principle
Under the specified pre-tensioning force, the specimen is fixed in the holder of one end of the twister, and the holder of the other end of the twist is rotated
The twist of the sample in the specified length until the strands or monofilaments in the sample are parallel, observe the twist direction and read the twist value.
4 instruments and tools
4.1 twist meter
The twist test shall be carried out using a twist meter, which shall meet the following requirements.
a) with two grippers, one of which can be connected to the twist meter motor shaft can rotate in the direction of rotation in both directions but not
Can move, the other movable holder can adjust the sample clamping length but can not rotate;
b) the number of revolutions of the rotary counter should be recorded or displayed to the nearest one;
c) with twist indicator;
d) with the measurement of the length of the sample scale, the accuracy of 1mm;
e) a device having a pre-tension applied to the sample.
4.2 Tools
Analysis needle.
5 Test General
5.1 Test environment
The test shall be carried out in the standard atmospheric environment specified in GB/T 6529.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 33338-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 33338-2016
$85.00