GB/T 32880.3-2016Economic evaluation of power quality—Part 3: Method for collecting data (English PDF)
电能质量经济性评估 第3部分:数据收集方法
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32880.3-2016 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 29, 2016
Implementation date
March 1, 2017
Scope
GB/T 32880.3-2016 is the English-translated version of 电能质量经济性评估 第3部分:数据收集方法.
GB/T 32880.3-2016 is the Chinese standard "Economic evaluation of power quality—Part 3: Method for collecting data". Its scope clause reads: This section regulates the scope, content and collection of data collected for power quality assessment of power users and public distribution networks method.
This section applies to data collection in power quality assessment of power users and public distribution networks. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 32880.3-2016
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- K 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 terms and definitions
- 3 Power quality economic data
- 3.1 Data composition
- 3.2 Basic data on economic cost of electricity users
- 3.4 Power quality related monitoring data
- 3.5 Equipment and system parameters
- 4 Energy quality economic data collection method
- 4.1 Data collection
- 4.2 Data estimates
- Appendix A (informative) Summary of data on power quality economic data
- Appendix B (informative) Simulation Estimation
- Appendix C (informative) Probability analysis of harmonics
1 Scope
This section regulates the scope, content and collection of data collected for power quality assessment of power users and public distribution networks method.
This section applies to data collection in power quality assessment of power users and public distribution networks.
2 terms and definitions
The following terms and definitions apply to this document.
2.1
Power quality; power quality;
The electrical characteristics of the power system at the designated point, related to the normal operation of the electrical equipment (or operation) of the voltage and current indicators of the deviation from the base
The degree of quasi - technical parameters.
Note. Baseline technical parameters generally refer to the target values in the ideal power supply state, which may involve compatibility between power supply and load.
[GB/T 32507-2016, Definitions 2.1.1]
2.2 Continuous type continuousvariation type
Continuous occurrence of power quality disturbance phenomenon. The important features of the voltage or current performance of the average root value, frequency, phase difference in the time
Any moment on the axis is always a small change. The measurement and evaluation are often used to deal with the probability of statistical methods.
[GB/T 32507-2016, definition 3.4]
2.3 Event type
Sudden occurrence of power quality disturbance. Its important features are manifested as a voltage or current that deviates significantly from its rating or ideal wave for a short time shape. Such as voltage sags, instantaneous overvoltages, and so on. In its monitoring and evaluation, usually use its characteristic to express.
[GB/T 32507-2016, definition 3.5]
2.4 Voltage Overloaded voltagedip (sag)
The power system in a certain frequency voltage average square root value suddenly dropped to 0.1pu ~ 0.9pu, and after a short duration of 10ms ~ 1min
Return to normal phenomenon.
Note. IEC standard provisions to reduce the range of 0.01pu ~ 0.9pu.
[GB/T 30137-2013, definition 3.1]
2.5 Short interrupt
The power system in a certain frequency voltage average root value suddenly reduced to 0.1pu below, and in a short period of time after 10ms ~ 1min recovery
Normal phenomenon.
[GB/T 30137-2013, definition 3.2]
2.6 Harmonic (component)
The non-sinusoidal periodicity is decomposed by Fourier series, and the resulting sinusoidal component with an integer multiple of the fundamental frequency is obtained.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32880.3-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32880.3-2016
$415.00