Valid

GB/T 3273-2015Hot-rolled steel plates and strips for automobile frames (English PDF)

汽车大梁用热轧钢板和钢带

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 3273-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 11, 2015

Implementation date

June 1, 2016

Scope

GB/T 3273-2015 is the English-translated version of 汽车大梁用热轧钢板和钢带.

GB/T 3273-2015 is the Chinese standard "Hot-rolled steel plates and strips for automobile frames".

Its scope clause reads: This Document specifies the classification, codes, notations for designations, ordering details, manufacturing process, technical requirements, test methods, inspection rules, packaging, marking, and quality certificate for hot-rolled steel plates and strips used in automobile frame.

This Document applies to hot-rolled steel plates and strips (hereinafter referred to as "plates and strips") with a thickness not exceeding 18.0 mm used in the manufacture of longitudinal and transverse beams of automobile frames.

Its clauses include terms and definitions; classification, codes and notations for designations; ordering details; manufacturing process.

Found what you need?

Document preview — GB/T 3273-2015

National Standard of the People's Republic of China

ICS
77.140.50
Classification
H 46
Replacing
GB/T 3273-2005

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • [Preview only]
  • 1 Scope
  • 1.2 Principle
  • 1.3 Reagents
  • 2 Normative References
  • 2.1 Terms
  • 3 Designation, Classification and Code Number
  • 4 Order Contents
  • 5 Dimension, Shape, Weight and Tolerances
  • 6 Technical Requirements
  • 7 Special Requirement
  • 8 Test methods
  • 9 Inspection Rules

1 Foreword

GB/T 3273-2015 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 11 September 2015 and has been in force since 1 June 2016.

It replaces the earlier edition GB/T 3273-2005, GB/T 3273-1989.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the designation, classification and code number, order contents, dimensions, shape, weight and tolerances, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of low alloy steel and alloy steel hot-rolled steel plates and strips used for automobile frame. It is applicable to hot-rolled steel plates and strips (hereinafter referred to as steel plates and steel strips) 1.6mm~16.0mm in thickness used for manufacturing automobile frame (longitudinal frame and transverse frame).

GB/T 3273-2015 falls under ICS 77.140.50, in the field of metallurgy.

This catalogue holds 3,436 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 Normative references

GB/T 222 — Permissible Tolerances for Chemical Composition of Steel Products

GB/T 223.3 — Methods for Chemical Analysis of Iron, Steel and Alloy - the Diantipyryl Methane Phosphomolybdate Gravimetric Method for the Determination of Phosphorus Content

GB/T 223.5 — Steel and Iron - Determination of Acid-soluble Silicon and Total Silicon Content - Reduced Molybdosilicate Spectrophotometric Method

GB/T 223.6 — Methods for Chemical Analysis of Iron, Steel and Alloy - The neutralization Titrimetric Method for the Determination of Boron Content

GB/T 223.11 — Iron, Steel and Alloy - Determination of Chromium Content - Visual Titration or Potentiometric Titration Method

GB/T 223.12 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium carbonate Separation-diphenyl carbazide Photometric Method for the Determination of Chromium Content

GB/T 223.13 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Ammonium Ferrous Sulfate Titration Method for the Determination of Vanadium Content

GB/T 223.14 — Methods for Chemical Analysis of Iron, Steel and Alloy - The N-benzoy-N-phenylhydroxylamine Extraction Photometric Method for the Determination of Vanadium Content

GB/T 223.16 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Chromotropic Acid Photometric Method for the Determination of Titanium Content

GB/T 223.17 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Diantipyryl Methane Photometric Method for the Determination of Titanium Content

GB/T 223.18 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Sodium Thiosulfate Separation Iodimetric Method for the Determination of Copper Content

GB/T 223.19 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Neocuproine-chloroform Extraction Photometric Method for the Determination of Copper Content

GB/T 223.23 — Iron, Steel and Alloy - Determination of Nickel Content - The Dimethylglyoxime Spectrophotometric Method

GB/T 223.26 — Iron, steel and Alloy - Determination of Molybdenum content - The Thiocyanate Spectrophotometric Method

GB/T 223.40 — Iron, Steel and Alloy - Determination of Niobium Content - The Sulphochlorophenol S Spectrophotometric Method

GB/T 223.49 — Methods for Chemical Analysis of Iron, Steel and Alloy - Extraction Separation-chlorophosphonazo mA Spectrophotometric Method for the Determination of the Total Rare Earth Content

GB/T 223.53 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Copper Content

GB/T 223.54 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Flame Atomic Absorption Spectrophotometric Method for the Determination of Nickel Content

GB/T 223.58 — Methods for Chemical Analysis of Iron, Steel and Alloy - The Extraction-absorption Catalytic Polarographic Method for the Determination of Manganese Content

GB/T 223.59 — Iron, Steel and Alloy - Determination of Phosphorus Content - Bismuth Phosphomolybdate Blue Spectrophotometric Method and Antimony Phosphomolybdate Blue Spectrophotometric Method

4 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 15 pages

5 Related standards

Other editions:

GB/T 3273-2026 (later edition)

GB/T 3273-2005 (earlier edition)

GB/T 3273-1989 (earlier edition)

6 Classification and status

International classification (ICS): 77.140.50

Chinese Standard Classification (CCS): H 46

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 3273

EditionTitleRevisionStatus
GB/T 3273-2015Hot-rolled steel plates and strips for automobile framescurrent editionCurrent
GB/T 3273-2005Hot-rolled steel plates and strips for automobile framesprevious editionSuperseded

This page sells the current edition, GB/T 3273-2015. Earlier editions are listed for reference only.

How to Download GB/T 3273-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 3273-2015

$75.00