Valid

GB/T 32709-2016Safety requirements for laboratory instruments and equipment—Industry analysis instrument (English PDF)

实验室仪器及设备安全规范 煤炭工业分析仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (41 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32709-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

June 14, 2016

Implementation date

January 1, 2017

Scope

GB/T 32709-2016 is the English-translated version of 实验室仪器及设备安全规范 煤炭工业分析仪.

GB/T 32709-2016 is the Chinese standard "Safety requirements for laboratory instruments and equipment—Industry analysis instrument". Its scope clause reads: This standard specifies the safety requirements of the coal industry analyzer.

This standard applies to the determination of coal, coke in the water, ash, volatile coal industry analyzer (the following simple analyzer). Its clauses include normative reference documents.

Found what you need?

Document preview — GB/T 32709-2016

National Standard of the People's Republic of China

ICS
17.200.10
Classification
A 54

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 normative reference document
  • 3 Terms and definitions
  • 4 Test
  • 5 logo and file
  • 6 anti-shock
  • 7 Anti-mechanical hazards
  • 8 Resistance to mechanical shock and impact
  • 9 to prevent the spread of flame
  • 10 Equipment temperature limits and heat resistance
  • 11 components
  • Appendix A (normative appendix) Routine test
  • Appendix B (normative appendix) Components that specify insulation requirements
  • Appendix C (normative) Measurement of electrical clearance and creepage distances
  • Appendix D (normative) Reduced pollution levels

1 Scope

This standard specifies the safety requirements of the coal industry analyzer.

This standard applies to the determination of coal, coke in the water, ash, volatile coal industry analyzer (the following simple analyzer).

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

Determination of softening temperature (VST) of thermoplastics GB/T 1633-2000

GB/T 4207-2012 Determination of resistance to traceability and electrical tracking of solid insulation materials

GB 4208-2008 enclosure protection class (IP code)

GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1. General requirements

GB/T 5013 (all parts) Rated voltage 450/750V and below rubber insulated cable

GB/T 5023 (all parts) Rated voltage 450/750V and below PVC insulated cable

Graphical symbols for use in electrical equipment - Part 2. Graphical symbols ISO /TS 545 Technical Corrigendum

GB/T 9364 (all parts) Miniature fuses - Part 1. Definition of small fuses and general requirements for small fuse links

GB/T 11020-2005 List of Flammability Test Methods for Solid Nonmetallic Materials Exposed to Flame Source

Electrical insulation - Heat resistance and presentation method GB/T 11021-2014

Low - voltage switchgear and controlgear - Part 1. General

GB 14048.3-2008 Low - voltage switchgear and controlgear - Part 3. Switches, isolators, disconnectors and fuses

Electrician

Electrical accessories - Wire assemblies and interconnecting wire assemblies GB/T High voltage test technology - Part 1. General definitions and test requirements GB/T GB/T 17465 (all parts) couplings for household and similar use

ISO 3864-1..2011 Graphical symbols - Safety colors and safety signs - Part 1. Safety signs and safety markings - Design principles (Graphicalsymbols-Safetycoloursandsafetysigns-Part 1. designprinciplesforsafetysignsand safetymarkings

ISO 7000..2004 Graphical symbols for equipment and a list (Graphicalsymbolsforuseonequipment-

Indexandsynopsis)

IEC 60027-3..2002 Letter symbols for electrical technology (Logarithmic andrelatedquantities, andtheirunits)

IEC 60664-3..2003 Insulation coordination for low voltage systems - Part 3. Use of coatings to improve the insulation fit of printed circuit board systems (Insulationcoordinationforequipmentwithinlow-poweredystems-Part 3. Use ofcoating, pottingor mouldingforprotectionagainstpolution […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32709-2016

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
41 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32709-2016

$650.00