GB/T 32384-2015Standard test method for separation and determination of aromatic fractions in middle distillates—Solid-phase extraction and gas chromatographic method (English PDF)
中间馏分中芳烃组分的分离和测定 固相萃取-气相色谱法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32384-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2015
Implementation date
May 1, 2016
Scope
GB/T 32384-2015 is the English-translated version of 中间馏分中芳烃组分的分离和测定 固相萃取-气相色谱法.
GB/T 32384-2015 is the Chinese standard "Standard test method for separation and determination of aromatic fractions in middle distillates—Solid-phase extraction and gas chromatographic method".
Its scope clause reads: This standard specifies the use of solid phase extraction - gas chromatography separation and determination of middle distillates, including fatty acid methyl ester in the aromatic hydrocarbon group Fraction, a non-aromatic component and a fatty acid methyl ester component.
This standard applies to middle distillates in the range of 170 ° C to 400 ° C, including diesel oils containing less than 10% by volume of fatty acid methyl esters.
This standard is divided into method one and method two. Method 1 is suitable for the middle distillate containing no fatty acid methyl ester. Method 2 is suitable for containing fatty acids Methylation volume of less than 10% diesel.
This standard applies to the determination of aromatic components containing aromatic components of 4% to 50% of the middle distillate samples, containing fatty acid methyl ester component fraction For 2% to 10% diesel samples.
Samples beyond this range of content This standard can also be measured, but no precision data is given.
In the analysis of this standard method, aromatic hydrocarbons include thiophene sulfur compounds, nitrogen compounds and oxygen compounds; according to the standard method In the case of the two analyzes, the nitrogen-containing compounds and the oxygen-containing compounds included in the fatty acid methyl ester component may have an effect on the results. Its clauses include normative reference documents; terms and definitions.
Found what you need?
Document preview — GB/T 32384-2015
National Standard of the People's Republic of China
- ICS
- 75.160.20
- Classification
- E 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 normative reference documents
- 3 terms and definitions
- 3.1 Aromatic component
- 3.2 Nonaromatic components
1 Scope
This standard specifies the use of solid phase extraction - gas chromatography separation and determination of middle distillates, including fatty acid methyl ester in the aromatic hydrocarbon group
Fraction, a non-aromatic component and a fatty acid methyl ester component.
This standard applies to middle distillates in the range of 170 ° C to 400 ° C, including diesel oils containing less than 10% by volume of fatty acid methyl esters.
This standard is divided into method one and method two. Method 1 is suitable for the middle distillate containing no fatty acid methyl ester. Method 2 is suitable for containing fatty acids
Methylation volume of less than 10% diesel.
This standard applies to the determination of aromatic components containing aromatic components of 4% to 50% of the middle distillate samples, containing fatty acid methyl ester component fraction
For 2% to 10% diesel samples. Samples beyond this range of content This standard can also be measured, but no precision data is given.
In the analysis of this standard method, aromatic hydrocarbons include thiophene sulfur compounds, nitrogen compounds and oxygen compounds; according to the standard method
In the case of the two analyzes, the nitrogen-containing compounds and the oxygen-containing compounds included in the fatty acid methyl ester component may have an effect on the results.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 1885 Oil Meter (GB/T 1885-1998, eqvISO 91-2..1991)
GB/T 4756 Petroleum liquid manual sampling method (GB/T 4756-1998, eqvISO 3170. 1988)
Petroleum products - Test methods - Determination of precision data
GB/T 20828 Biodiesel for fuel blending of diesel engines (BD100)
SH/T 0604 Determination of density of crude oil and petroleum products (U-shaped vibrating tube method) (SH/T 0604-2000, eqvISO 12185..1996)
SH/T 0606-2005 Determination of Hydrocarbon Composition of Middle Distillates (Mass Spectrometry)
ASTMD2549 elution chromatography for the separation of aromatic and nonaromatic components from high boiling oils (Testmethodforsepara- tionofrepresentativearomaticsandnonaromaticsofhigh-boilingoilsbyelutionchromatography
3 terms and definitions
The following terms and definitions apply to this document.
3.1 Aromatic component
Including monocyclic aromatic hydrocarbons, polycyclic aromatic hydrocarbons, aromatic hydrocarbons and sulfur, nitrogen and oxygen containing compounds.
3.2 Nonaromatic components
For straight-run and hydrogenation fraction samples, including paraffins and naphthenes, for the cracked fraction samples, also include alkenes and cycloolefins.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 32384-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32384-2015
$205.00