GB/T 32357-2015Guide for pollution control of waste electrical and electronic products' take-back and (English PDF)

1 Scope

This Standard specifies the terms and definitions, basic principles of the pollution control of waste electrical and electronic products' take-back and treatment, basic requirements for the pollution control of the waste electrical and electronic products' take-back, basic requirements for the pollution control of the waste electrical and electronic products' treatment, requirements of information management system, and personnel management requirements.

This Standard is applicable to the take-back and treatment enterprises of waste electrical and electronic products, and the industry authorities to regulate and manage the take-back and treatment activities against the waste electrical and electronic products; other enterprises can refer to this.

2 Normative References

The following documents are essential to the application of this document. For the dated documents, only the versions with the dates indicated are applicable to this document; for the undated documents, only the latest version (including all the amendments) are applicable to this Standard.

GB/T 18597 Standard for Pollution Control on Hazardous Waste Storage

GB/T 18599 Standards for Pollution Control on the Storage and Disposal Site for General Industrial Solid Wastes

HJ/T 91 Technical Specifications Requirements for Monitoring of Surface Water and Waste Water

HJ/T 397 Technical Specifications for Emission Monitoring of Stationary Source

HJ 640 Technical Specifications for Environmental Noise Monitoring-Routine Monitoring for Urban Environmental Noise

3 Terms and Definitions

The following terms and definitions are applicable to this document.

4 Basic Principles

4.1 The take-back and treatment activities against the waste electrical and electronic product shall meet the management requirements of Regulations for Management of Recycling Disposal of Waste Electric and Electronic Products, and other relevant laws and regulations.

4.2 On the premise of no violating the relevant laws, regulations or standards, give priority to the reuse of waste electrical and electronic products and components.

4.3 The environmental protection technologies, circular economy technologies, and advanced and applicable technologies for comprehensive utilization of the renewable resources, which are encouraged to develop by China shall be taken.

4.4 The environmental monitoring system against the characteristic pollutants and pollutant sources during the take-back and treatment of waste electrical and electronic product shall be established.

4.5 National requirements for labor safety and human health shall be met.

5 Basic Requirements for the Pollution Control of Waste Electrical and Electronic Products' Take-Back

5.1 The waste electrical and electronic products shall be collected and stored by types (see Appendix A); and they shall be identified.

5.2 The waste electrical and electronic products shall not be disassembled during the recycling process.

5.3 When collect the products containing display, they shall be sorted and stored according to various display structures, such as cathode ray tube, liquid crystal, plasma and etc.

5.4 When collect the refrigeration equipment, the integrity of the refrigeration system shall be checked, and then conduct sorted and separate collection and identification.

During the transporting and storing process of the refrigeration equipment with intact refrigeration system, necessary protective measures shall be taken for the benefit of the recycling of refrigerant and compressor lubricant.

5.5 When transporting and storing the products that may contain residual liquid, necessary measures shall be taken to avoid the leakage of the liquid.

5.6 The transportation tools of the waste electrical and electronic products shall take the protective measures and water-and-oil-collecting measures to avoid the dropping

6 Basic Requirements for the Pollution Control of Waste Electrical and Electronic Products' Treatment

6.7 Identify and conduct sorted management for the selected parts (see Appendix C) generated in the treatment process of the waste electrical and electronic products.

The selected parts in the national hazardous waste list, according to the relevant provisions of GB 18597, shall be identified and managed as per the hazardous waste.

6.8 Identify and conduct sorted management for the selected treatment parts (see Appendix D) generated in the treatment process of the selected parts.

Note: the definition in Clause 3.2 of GB/T 21474-2008 shall be amended.

Note: the definition in Clause 3.9 of GB/T 23685-2009 shall be amended.

Note: the definition in Clause 3.3 of GB/T 23685-2009 shall be amended.

Note: the definition in Clause 3.4 of GB/T 23685-2009 shall be amended. […]