GB/T 32287-2015Methods of determination and calculation of heat balance for hot blast stove in blast furnace (English PDF)
高炉热风炉热平衡测定与计算方法
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32287-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 10, 2015
Implementation date
January 1, 2017
Scope
GB/T 32287-2015 is the English-translated version of 高炉热风炉热平衡测定与计算方法.
GB/T 32287-2015 is the Chinese standard "Methods of determination and calculation of heat balance for hot blast stove in blast furnace".
Its scope clause reads: This standard specifies the hot blast furnace hot blast furnace heat balance measurement and calculation of the benchmark, determination of preparation, determination of content and methods, measurement steps and Calculation method, determination report.
This standard applies to blast furnace top combustion, external combustion and internal combustion hot air furnace heat balance determination and calculation, other types of hot air furnace heat balance determination And calculation can also refer to.
Its clauses include normative reference documents; terms and definitions; determination and calculation of the baseline.
Found what you need?
Document preview — GB/T 32287-2015
National Standard of the People's Republic of China
- ICS
- 77.010
- Classification
- H 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 normative reference document
- 3 Terms and definitions
- 4 Determination and calculation of benchmark
- 5 Preparation for determination
- 6 Determination of content and methods
- 7 Measure Step
- 8 Calculation method
- 9 Report
- Appendix A (Normative Appendix) Equipment and Hot Stove Overview
1 Scope
This standard specifies the hot blast furnace hot blast furnace heat balance measurement and calculation of the benchmark, determination of preparation, determination of content and methods, measurement steps and
Calculation method, determination report.
This standard applies to blast furnace top combustion, external combustion and internal combustion hot air furnace heat balance determination and calculation, other types of hot air furnace heat balance determination
And calculation can also refer to.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
General rules for energy balance of energy equipment GB/T General rules for calculation of thermal efficiency of equipment GB/T
3 terms and definitions
The terms and definitions defined in GB/T 2587 and the following terms and definitions apply to this document.
3.1 Operating cycle
In the normal production of blast furnace and hot air furnace conditions stable, by the hot air stove this burning period, until the next burning period so far , Including the burning period, the air supply period and the exchange time.
4 Determination and calculation of the baseline
4.1 reference temperature
Using the ambient temperature, take the air temperature around 1m.
4.2 fuel calorific value
Using the low (bit) calorific value of the actual fuel. For the general hot stove, the use of wet gas low (bit) calorific value.
4.3 Thermal balance measurement range
Hot air stove, including hot air furnace body, hot air duct, air - gas preheating device and flue heat recovery and utilization devices, thermal balance test
Can be divided into.
a) hot air furnace body. the burning period from the burner to the flue valve, the air supply from the cold air valve to the hot air valve hot air furnace body and its internal
Connecting pipe part;
b) hot air stove. hot air furnace body plus the external hot air pipe part;
c) hot air furnace system. In addition to hot air furnace, but also includes combustion air, gas preheating device and flue heat recovery and utilization of equipment and other parts.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32287-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 32287-2015
$385.00