GB/T 32123-2015Treatment and disposal specification for cyanide waste water (English PDF)
含氰废水处理处置规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32123-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 9, 2015
Implementation date
May 1, 2016
Scope
GB/T 32123-2015 is the English-translated version of 含氰废水处理处置规范.
GB/T 32123-2015 is the Chinese standard "Treatment and disposal specification for cyanide waste water". Its scope clause reads: This standard specifies the cyanide-containing waste water treatment and disposal of terms and definitions, treatment and disposal methods and emission requirements.
This standard applies to the process of treatment and disposal of wastewater containing cyanide. Its clauses include terms and definitions; containing cyanide wastewater treatment and disposal methods.
Found what you need?
Document preview — GB/T 32123-2015
National Standard of the People's Republic of China
- ICS
- 13.030.20
- Classification
- Z 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 containing cyanide wastewater treatment and disposal methods
1 Scope
This standard specifies the cyanide-containing waste water treatment and disposal of terms and definitions, treatment and disposal methods and emission requirements.
This standard applies to the process of treatment and disposal of wastewater containing cyanide.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 5085.1 standard differential corrosive hazardous waste identification
GB 5085.3 identification of hazardous waste leaching toxic identification standard
GB 8978 Integrated Wastewater Discharge Standard
Water quality was measured HJ484 cyanide capacity and spectrophotometric methods
HJ585 free chlorine and total chlorine N, N- diethyl-1,4-phenylenediamine titration
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Wastewater containing cyanide
Containing inorganic cyanide (CN-), thiocyanate (SCN-) or cyanide-based metal complexes of industrial waste water generated in the process.
4 containing cyanide wastewater treatment and disposal methods
4.1 Acidification Recycling Law
4.1.1 Application
Suitable for processing containing inorganic cyanide (CN-) or cyanide-based metal complexes (except iron cyanide complexes) of wastewater containing cyanide. Applicable concentration
Cyanide (as CN) content of not less than 1g/L.
4.1.2 Principle
Hydrocyanic acid is a weak acid, the ionization equilibrium constant Ka = 6.2 × 10-10, a boiling point of 25.7 °C, easy to volatilize, under acidic conditions, wastewater
Inorganic cyanides tend to form hydrogen cyanide (HCN), absorption by water acidification, hydrogen cyanide and hydrogen cyanide gas stripping to achieve recovery
Purpose of cyanide ions.
NaCN H = HCN Na
Pb (CN) 2-4 4H = 4HCN Pb2
Zn (CN) 2-4 4H = 4HCN Zn2
Cu (CN) 2-3 2H = 2HCN CuCN -> (gray) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 32123-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 32123-2015
$145.00