GB/T 32065.2-2015Environmental test methods for oceanographic instruments - Part 2: Cold (English PDF)
海洋仪器环境试验方法 第2部分:低温试验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 32065.2-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 9, 2015
Implementation date
January 1, 2016
Scope
GB/T 32065.2-2015 is the English-translated version of 海洋仪器环境试验方法 第2部分:低温试验.
GB/T 32065.2-2015 is the Chinese standard "Environmental test methods for oceanographic instruments - Part 2: Cold". Its scope clause reads: GB/T 32065 provisions of this part of the test requirements of marine low temperature test equipment, test procedures and related information.
This section is used to determine the suitability assessment or marine instrument at low ambient conditions, but also as its low parts and components Reference temperature environmental testing. Its clauses include test requirements.
Found what you need?
Document preview — GB/T 32065.2-2015
National Standard of the People's Republic of China
- ICS
- 19.040
- Classification
- A 21
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 test requirements
- 3.1 General requirements
- 3.2 Test equipment and test preparation
- 3.3 Test temperature
- 3.4 Duration
1 Scope
GB/T 32065 provisions of this part of the test requirements of marine low temperature test equipment, test procedures and related information.
This section is used to determine the suitability assessment or marine instrument at low ambient conditions, but also as its low parts and components
Reference temperature environmental testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 32065.1-2015 marine instruments - Environmental test methods - Part 1. General
3 test requirements
3.1 General requirements
Standard atmospheric conditions for marine instrumentation and low temperature testing, the test sample installation, test temperature stability test should be separately according to the interrupt handling
The provisions of GB/T 32065.1-2015 in 4.2,6.1,6.2 and Chapter 7 will be.
3.2 Test equipment and test preparation
3.2.1
Test equipment shall comply with GB/T 32065.1-2015 in Chapter 5.
3.2.2
test, the test sample should be as close to the central chamber (chamber), which corresponds to any surface with the chamber (chamber) intramural
The minimum distance should be greater than 15cm, and the chamber (chamber) in the wind speed should not exceed 1.7m/s.
3.2.3
Test sample chamber (chamber) should be free from any direct radiation heating and cooling elements.
3.3 Test temperature
Unless otherwise specified, marine instrumentation and low temperature test temperature should be selected in the following provisions.
a) (-2 ± 3) °C;
b) (-10 ± 3) °C;
c) (-20 ± 3) °C;
d) (-55 ± 3) °C;
e) marine instrumentation lowest temperature environment.
3.4 Duration
After the temperature test sample to achieve sustained stable for at least 2h, or by the relevant specifications (for example. product standards, test program or test contracts,
Hereinafter the same) were.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 11715-2025Crude oil tank washing machine
- GB/T 46159-2025General technical specifications for subsea self-moving trenching operation system
- GB/T 46160-2025General technical specifications for subsea plough operation system
- GB/T 46238-2025General specification for under-freshwater search and rescue robots
- GB/T 5743-2025Marine pilot
- GB/T 23247-2023Autonomous drifting profiler
Similar standards
How to Download GB/T 32065.2-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 32065.1-2015 — Environmental test methods for oceanographic instruments - Part 1: General
GB/T 32065.10-2020 — Environmental test methods for oceanographic instruments—Part 10: Salt fog test
GB/T 32065.11-2021 — Environmental test methods for oceanographic instruments—Part 11: Shock and bump test
Secure payment via Stripe
Payments accepted
GB/T 32065.2-2015
$85.00