Valid

GB/T 31754-2015Technology specification for production of modified wood (English PDF)

改性木材生产技术规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31754-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

July 3, 2015

Implementation date

November 2, 2015

Scope

GB/T 31754-2015 is the English-translated version of 改性木材生产技术规范.

GB/T 31754-2015 is the Chinese standard "Technology specification for production of modified wood".

Its scope clause reads: This standard specifies the general requirements for the production of modified wood and plastic composite wood, wood impregnated with glue pressed wood, acetylated wood, charring wood, compressed wood, Bent wood, stained wood production specific requirements.

This standard applies to modified timber production. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 31754-2015

National Standard of the People's Republic of China

ICS
79.020
Classification
B 60

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 3 General requirements
  • 4.1 Production equipment
  • 4.1.1 Wood infusion device
  • 4.1.2 heat curing equipment
  • 4.1.3 Dosing system
  • 4.1.4 liquid storage system
  • 4.1.5 Exhaust collection and processing systems
  • 4.1.6 Waste collection and treatment system
  • 3 Electronic Control System 4.1.7
  • 4.1.8 timber transportation system
  • 4.2 manufacturing requirements
  • 4.3 Quality Inspection
  • 4.3.1 Quality personnel requirements
  • 4.3.2 Quality Inspection Method
  • 4.3.3 Batch provisions
  • 4.4 Product Quality Analysis
  • 4.5 Storage and transportation
  • 4.6 Product labeling, packaging and quality certification
  • 4.6.2 product packaging
  • 4.6.3 quality certification
  • 4.7 Production safety, health and environmental protection
  • 4.7.1 production workshop and staff health and safety requirements
  • 4.7.2 Water Environment
  • 4.7.3 Atmospheric Protection
  • 4.7.4 Production Enterprise environment
  • 6 5 WPC
  • 5.1 Production equipment
  • 5.2 Production of the immersion liquid
  • 5.3 Production Process
  • 5.4 Production of the technical requirements
  • 5.5 Production safety and health and environmental protection
  • 5.6 Production of fire
  • 5.7 Production Explosion
  • 6 pressure impregnated wood and wood glue
  • 6.1 Production equipment
  • 6.2 Production of infusion fluid
  • 6.3 impregnating wood production process
  • 6.5 Production of the technical requirements
  • 7 8 acetylated wood
  • 7.2 with pesticides
  • 7.3 Production Process
  • 7.4 Production of wood acetylation technology requirements
  • 8 9 charring wood
  • 8.1 high-temperature carbonization device
  • 8.2 Production Process
  • 8.3 Production of technical requirements
  • 9 compression and bending wood wooden
  • 9.1 compression and bending wood wood production equipment
  • 9.4 Compressed Wood production process
  • 9.5 compression wood production technical requirements
  • 9.6 curved wood production process
  • 9.7 multilayered glued bent wood production process
  • 10 12 stained wood
  • 10.2 Bleaching Common bleaching agents
  • 10.3 Bleaching additives commonly used
  • 10.4 dyeing agents commonly used
  • 10.5 Production Process
  • 10.6 Production of pollution prevention and control

1 Scope

This standard specifies the general requirements for the production of modified wood and plastic composite wood, wood impregnated with glue pressed wood, acetylated wood, charring wood, compressed wood,

Bent wood, stained wood production specific requirements.

This standard applies to modified timber production.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 144 timber inspection

GB 150 pressure vessel (all parts)

GB/T 153 conifer sawmills

GB/T 1927 Wood physical and mechanical test material collection method

GB/T 1928 General physical and mechanical test methods

GB/T 1929 wood sawing wood physical and mechanical tests and test specimens methods

GB/T 1932 Determination of shrinkage of the wood

GB/T 1934.2 Determination of wood Swelling

GB 3095 Ambient Air Quality Standard

GB 3838 Surface Water Quality Standards

GB/T 4817 Broadleaf Timber

GB/T 4822 Test sawmills

GB/T 6491 Timber drying quality

GB 8978 Integrated Wastewater Discharge Standard

GB 12348 industrial enterprises of environmental noise emission standard plant boundary

GB 12801 General requirements for the production process safety and health

GB/T 14019 wood preservative term

GB/T 31747 charring wood

SB/T 10383 commercial timber and its products logo

Radioisotopes and radiation safety and protection regulations People's Republic of China State Council Order No. 449

Dangerous chemical safety regulations People's Republic of China State Council Order No. 344

Stationary Pressure Vessel Safety Technology Supervision (TSGR0004-2009)

3 Terms and Definitions

GB/T 14019 and GB/T 31747 and defined by the following terms and definitions apply to this document.

3.1 Modified wood

To improve the performance and use of wood treated wood.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 31754-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31754-2015

$235.00