GB/T 31542-2015Steel-aluminum compound radiator (English PDF)
钢铝复合散热器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31542-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
February 1, 2016
Scope
GB/T 31542-2015 is the English-translated version of 钢铝复合散热器.
GB/T 31542-2015 is the Chinese standard "Steel-aluminum compound radiator".
Its scope clause reads: This standard specifies the steel-aluminum composite radiator (hereinafter referred to as the heat sink) terms and definitions, specifications and models, materials and structures, requirements, test Test methods, inspection rules, signs, instructions and certification, packaging, transportation and storage.
This standard applies to industrial and civil buildings, not higher than 95 °C and the water quality in line with GB/T 29044-2012 4.5 specified heat Water radiator heat medium. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31542-2015
National Standard of the People's Republic of China
- ICS
- 91.140.10
- Classification
- Q 83
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
1 Scope
This standard specifies the steel-aluminum composite radiator (hereinafter referred to as the heat sink) terms and definitions, specifications and models, materials and structures, requirements, test
Test methods, inspection rules, signs, instructions and certification, packaging, transportation and storage.
This standard applies to industrial and civil buildings, not higher than 95 °C and the water quality in line with GB/T 29044-2012 4.5 specified heat
Water radiator heat medium.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
GB/T 985.1 gas welding, arc welding, gas welding and beam welding Recommended groove
GB/T 1732 Determination of impact resistance of film
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 3091 low pressure liquid delivery welded steel pipe
GB/T 3190 Wrought aluminum and aluminum alloy chemical composition
GB/T 3639 cold drawn or cold rolled precision seamless steel pipe
GB 5237.1 Aluminum Profiles Part 1. matrix
GB/T 7307 55 ° non-sealing pipe thread
GB/T 8163 Seamless steel tubes
GB/T 8544 aluminum and aluminum alloy cold-rolled strip
Cut test GB/T 9286-1998 Paints and varnishes
GB/T 9969 General Instructions industrial products
GB/T 12467.3 quality welding of metallic materials - Part 3. General quality requirements
GB/T 13237 quality carbon structural steel sheets and strips
GB/T 13754 Determination of the amount of heating radiator heat
GB/T 19866 general principles of welding procedures and assessment
HG/T 2006 thermosetting powder coating
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
After the column by the steel pipe and aluminum pipe Expansion composite wing, and then the upper and lower radiator welded steel pipe header combinations.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31542-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31542-2015
$205.00