GB/T 31511-2015Guide for the implementation of environmentally conscious design of industrial comprehensive utilization equipments (English PDF)
工业综合利用设备环境化设计实施指南
This is a limited preview
Buy now to download the full PDF (19 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31511-2015 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
May 15, 2015
Implementation date
December 1, 2015
Scope
GB/T 31511-2015 is the English-translated version of 工业综合利用设备环境化设计实施指南.
GB/T 31511-2015 gives the process and the methods for implementing environmentally conscious design of industrial comprehensive utilization equipment. Clause 1 states that it applies to carrying out that implementation, and no exclusion is stated.
The contents run from the scope, the normative references and the clause on terms, definitions and abbreviations to an overview in clause 4, design and the elements of environmental design in clause 5, the main methods for implementing environmental design in clause 6, and the evaluation of environmental design in clause 7, with a bibliography at the end.
Clause 3 defines industrial comprehensive utilization equipment, taking the definition from GB/T 31513-2015, as industrial equipment used for the resource recycling of residual heat and steam or gas, of liquid waste and of solid waste in industrial production, and defines environmentally conscious design, also called ecological design, as a design methodology that systematically integrates environmental considerations into the product design process in order to improve the environmental impact over the product life cycle.
The same clause takes the definition of environmental impact from GB/T 24001-2004 and the definition of raw material, which it notes includes recycled secondary material, from GB/T 24044-2008.
The introduction states that the standard draws on domestic and foreign experience and practice in environmental design together with business management practice, and that it is the supporting technical documentation for GB/T 31513-2015, the environmental design guidelines for comprehensive utilization of industrial equipment, and contributes to the understanding and application of that standard.
Clause 2 cites GB/T 31513-2015 and GB/T 30438-2013, and the draft breaks off inside clause 3. The standard is managed by the National Standardization Technical Committee on Environment (SAC/TC207), and the page places it at ICS 13.020.20 and Chinese classification Z04. It was issued on 15 May 2015 and has applied since 1 December 2015.
Found what you need?
Document preview — GB/T 31511-2015
National Standard of the People's Republic of China
- ICS
- 13.020.20
- Classification
- Z 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms, Definitions and Abbreviations
- 4 Overview
- 5 design and environmental design elements
- 7 Evaluation of Environmental Design
- References
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
Introduction
The standard design environment from domestic and foreign experience and practice, combined with the practice of business management, from the environment through the design of ships Respect Cheng, principal environmental design method gives the comprehensive utilization of industrial equipment Environmental Design Guidelines Implementation Guide is organized and implemented GB/T 31513-2015 "comprehensive utilization of industrial equipment Environmental Design Guidelines" supporting technical documentation, contribute to the GB/T 31513-2015 Understanding and application.
1 Scope
This standard gives a comprehensive utilization of industrial processes and methods of environmental equipment design implementation.
This standard applies to carry out the implementation of the comprehensive utilization of industrial design of the device environment.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 31513-2015 comprehensive utilization of industrial equipment Environmental Design Guidelines
GB/T 30438-2013 support data dictionary technology modular design principles and methods
3 Terms, definitions and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Comprehensive utilization of industrial equipment
Used in industrial production of residual heat and steam (gas), liquid waste, solid waste resource recycling industrial equipment. [GB/T 31513-2015, Definition 3.1]
3.1.2 Environmental Design
Ecological Design
Environmentally conscious design
In the product design process to integrate environmental considerations into system design methodology systematically designed to improve product life cycle environmental impact. [GB/T 31513-2015, 3.2 Definition]
3.1.3 Environmental Impact
Because of all or part of the organization's activities, products or services to the environment caused by any harmful or beneficial changes. [GB/T 24001-2004, the definition 3.7]
3.1.4 Raw materials
For the production of a product of primary and secondary materials.
Note: Secondary material includes recycled material. [GB/T 24044-2008, the definition 3.15]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 19 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download GB/T 31511-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 30438-2013 — Principles and methods for data dictionary technology of supporting modularity design
GB/T 31513-2015 — Guidelines for environmentally conscious design of industrial comprehensive utilization equipments
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 31511-2015
$295.00