Valid

GB/T 30438-2013Principles and methods for data dictionary technology of supporting modularity design (English PDF)

支持模块化设计的数据字典技术原则和方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 30438-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2013

Implementation date

August 1, 2014

Scope

GB/T 30438-2013 is the English-translated version of 支持模块化设计的数据字典技术原则和方法.

GB/T 30438-2013 is the Chinese standard "Principles and methods for data dictionary technology of supporting modularity design". Its scope clause reads: This standard specifies support modular design of data dictionary compilation principles, the principle of division of the module, the module content and data dictionary Claim.

This standard applies to the establishment of a modular design module and data dictionary module library prepared in accordance with the present standard data modules written word Code can be used to design a modular integrated modules, management, maintenance, dissemination and sharing. Its clauses include terms and definitions.

Found what you need?

Document preview — GB/T 30438-2013

National Standard of the People's Republic of China

ICS
25.040.40
Classification
L 67

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Module
  • 3.2 Modular modularity
  • 3.3 Module division modularization
  • 3.4 Modular design
  • 3.5 Module Library
  • 3.6 Data
  • 3.7 Dictionary
  • 3.8 Category classification
  • 3.9 Property attribute
  • 3.10 The identifier
  • 4.1 Scientific Principles
  • 4.2 Applicability Principles
  • 4.3 Principle of Unity
  • 4.4 The principle of independence
  • 5.1 The principle of independence
  • 5.2 Principles of moderate size
  • 5.3 Reusability principle
  • 5.4 Uniqueness of principle
  • 5.5 Design and Technology separating separation surface coincides principle
  • 5.6 Single-stage stratified principle
  • 5.8 generalized principle
  • 6.3 Requirements write data dictionary

1 Scope

This standard specifies support modular design of data dictionary compilation principles, the principle of division of the module, the module content and data dictionary

Claim.

This standard applies to the establishment of a modular design module and data dictionary module library prepared in accordance with the present standard data modules written word

Code can be used to design a modular integrated modules, management, maintenance, dissemination and sharing.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 7408-2005 data elements and interchange formats - Information interchange the date and time notation

GB/T 17645.42 Industrial automation systems and integration - Parts library - Part 42. Description methodology. Methodology for structuring parts families party

Law

Constitute rules GB/T 24467-2009 General Mechanical Components Product data dictionary hierarchy

3 Terms and Definitions

GB/T 17645.42 defined and the following terms and definitions apply to this document.

3.1 Module

Components of the system, with the typical generic independent unit determines the functions and standard interfaces.

3.2 Modular modularity

From the viewpoint of the system, the application of the principle of similarity, research products (or system) structure, unified standardized principles, merge, Jane

Technology, take the decomposition and combination methods, the establishment of product module system, and combined into different products (or systems) through standard interfaces between modules

The whole process.

3.3 Module division modularization

By functional decomposition and structural decomposition method, the decomposition product of complex multi-type, multi-linked independent module process.

Note. The number and size of the structure of the functional elements contained in the module determines the size of the module as well as the ease of manufacturing the product in action. reasonably

Partitioning module range is conducive to manufacturing modules, increasing module compatibility, interchangeability and versatility, expanding the use of modules, yield enhancement implementation

Product diversification capacity.

3.4 Modular design

The combination of certain elements together to form a number of modules with specific functions, these modules as the module and its versatility

His products feature a variety of combinations, to form a new system, resulting in a variety of different functions or the same function, the performance of different products in the design method.

3.5 Module Library

The modular design of the product support module repository.

3.6 Data

A formal expression of information, it is suitable for human or computer communication, interpretation, or processing.

[GB/T 16656.1-2010, the definition 3.2.16]

3.7 Dictionary

Contains a series of entries in the table, a meaning corresponding to an entry in the dictionary, a dictionary entry is only one meaning.

[GB/T 17645.24-2003, the definition 3.32]

3.8 Category classification

Depending on which certain predetermined characteristics, the systematic collection of objects into subsets.

3.9 Property attribute

Describe the characteristics of the object a collection.

3.10 The identifier

A symbol or a symbol set by the value of the data element composed for naming an object, and the object as far as possible indicate specific attributes.

NOTE. Modify the GB/T 17645.26-2000 as defined in 3.6.

Principle 4 modules compiled data dictionary

4.1 Scientific Principles

Science should attribute selection module, scientific description of the module attribute information. Specific requirements are as follows.

--- Scientific selection Module Properties. Module Properties meet a variety of modular design system requirements for the module properties and complete reflection of the module information;

--- Property Description Module Information Science. Designing dictionary entries should reflect the correct information module features, modular design to meet the letter of the module

Description and information processing requirements.

4.2 Applicability Principles

Should the actual demand for modular design, including product configuration design requirements, demand information technology, life cycle management module

It needs. Specific requirements are as follows.

--- Configuration design needs. module data dictionary should contain the version of the module, the batch configuration information such as the validity of the design requirements;

Demand --- Information Construction. Construction module data dictionary should meet the system's modular design, in particular the exchange of data between information systems

And the actual needs of sharing;

Demand --- module life cycle management. module data dictionary should contain priority module, the module status Module maturity life cycle

Management information required.

4.3 Principle of Unity

Should be for the entire product family, data dictionary system for unified planning, unified description, unified management. details as follows.

--- Unified Planning. should take full account of the module product family, consider all stages of the life cycle module, module compiled in a unified planning under

Block data dictionary;

--- Universal Description. Data Dictionary module shall be prepared in accordance with uniform rules that describe;

--- Unified Management. Responding to the preparation of the data dictionary, maintenance, revisions of unified management.

4.4 The principle of independence

Module description reflects its own characteristics module, should be independent of the specific information system.

5 module partition principle

5.1 The principle of independence

Should minimize the correlation between the modules, so that modules with relative independence, to meet the module design, management and independent production requirements.

5.2 Principles of moderate size

Module division should meet the particle size and a moderate number of principles. Based on the relationship between the cost and the number of modules, the total cost of the best

Principle, to determine the module partition granularity.

5.3 Reusability principle

Under the premise to meet the relevant technical requirements as much as possible to reuse existing modules to meet cost, quality, green, etc. Life Cycle Integrated optimal.

5.4 Uniqueness of principle

From a life cycle perspective should take into account the different needs of the module, the only module to determine the composition of the product. Identifier may be uniquely identified by a module

All custom data this module.

5.5 Design and Technology separating separation surface coincides principle

In the product development process, the design stage of the manufacturing process should be considered in the process module division as soon as possible to consider process issues, as far as possible

Product design and process separation surface separation surface coincide, should consider not only the function division of the product, the process should also consider dividing the product.

5.6 Single-stage stratified principle

When carrying the product breakdown structure, a module should not include another module, the module should not be nested, to simplify the effectiveness management.

For modules "only addition (add-only)", the same as the composition of the product structure stacked wood table that generates the final to meet customer needs.

Modules should not be by deleting parts from other modules to generate, but you can add some features (such as hole features, etc.) to generate a new module.

5.8 generalized principle

Module is a logical combination of components, and contains related design, technology, manufacturing and testing data.

Module should be generalized, not only by the actual collection of parts, but also by containing only a particular special features and interfaces

Of data elements or abstract composition relationship.

6 module data dictionary content and requirements

Entry Format 6.1 module data dictionary

Entry module format digital dictionary should be in accordance with the provisions of GB/T 17645.42, according to the following format for each of the properties of the modules description.

---name;

---description;

---Restrictions;

--- Value format.

6.1.1 Name

Concise expression of the meaning of the phrase module.

6.1.2 Description

Concise statement expressing the meaning of the module, in this standard is unique.

6.1.3 Constraints/Condition

This is a descriptor may have the following values. M (mandatory) or O (optional).

6.1.3.1 Required (M)

The property must be selected to describe the module.

6.1.3.2 Optional (O)

Describing the module can select the property, you can not select it.

6.1.4 Value Format

Expression of the maximum number and type (if it is a string) format or characters.

Content 6.2 module data dictionary

6.2.1 Overview

Modules module information including the data dictionary describes the feature information of the module, the module of the external information and the structural information of the module. Module

Feature information about the module refers to the design requirements, design principles, structural design, manufacturing and other intermediate data and other information possessed by each

Kind of characteristic information; information module describes the structure to achieve the required functions, a list of components contained within the module and forms relationships between

Department; external information module describes the relationship between the use of the environment module, module with other modules and other information.

6.2.2 Module feature information
6.2.2.1 The main contents

Feature information module includes a module identifier, module name, module definition, change authorization, version number, release build date, version description,

Module function, design principles, state of maturity, design principles, lead, interface type, the key point is installed, install the key point increment, for suppliers

Goods cycle, streamlining workflow, weight, weight unit, limit identification, owner, creator, process description, labeling instructions, model schematic connection relationship

Department of definitions, definitions and seal packaging definitions.

6.2.2.2 module identifier

Description. uniquely identifies the data dictionary identifies a module.

Constraints. Required.

Value Format. variable length string.

NOTE. This standard does not specify a specific code formatting.

6.2.2.3 module name

Description. This module concise expression the meaning of the phrase.

Constraints. Required.

Value format. a string of 30 alphanumeric.

6.2.2.4 Module Definition

Description. Additional information related to the module description.

Constraints. Required.

Value Format. variable length string.

6.2.2.5 Change Authorization

Description. Change the authorization number.

Constraints. Required.

Value Format. variable length string.

6.2.2.6 version number

Description. The version number of each record after the change module to occur.

Constraints. Required.

Value format. a string of three numbers.

6.2.2.7 version build date

Description. The new module generation date.

Constraints. Required.

Value format. should comply with GB/T 7408-2005 the provisions in 5.2.1.1.

6.2.2.8 Version Description

Description. The information recording module change from the old to the new version, including modification of components, add and delete.

Constraints. Required.

Value Format. variable length string.

6.2.2.9 Function Module

Description. The description of the module also has the main function.

Constraints. Required.

Value Format. variable length string.

6.2.2.10 Design Principles

Description. describe the design principles of the module.

Constraints. Optional.

Value Format. variable length string.

6.2.2.11 state of maturity

Description. The purpose is to identify module is in its life cycle is completed level, it represents the maturity level module data.

Constraints. Required.

Value Format. variable length string.

6.2.2.12 Design Principles

Description. The reasons for recording the basic design and design principles.

Constraints. Optional.

Value Format. variable length string.

6.2.2.13 Lead

Description. Module production lead time associated with the building blocks of the parts production time.

Constraints. Required.

Value Format. variable length string.

6.2.2.14 Interface Type

Description. The description of the module and interface in the form of products, such as mechanical interface, electrical interface, an optical interface, or thermal interface information.

Constraints. Required.

Value Format. variable length string.

6.2.2.15 The key point installation

Description. The description of the module key installed.

Constraints. Optional.

Value format. real array contains three elements.

6.2.2.16 key installation point increments

Description. The amount of adjustments made by the installation of key points.

Constraints. Optional.

Value format. real array contains three elements.

6.2.2.17 Supplier Delivery

Description. The vendor provides the module name of the delivery time period.

Constraints. Required.

Value Format. variable length string.

6.2.2.18 weight

Description. The weight of the module.

Constraints. Required.

Value format. positive real number.

6.2.2.19 unit of weight

Description. The weight of the units, such as kilograms (kg), gram (g) and the like.

Constraints. Required.

Value format. alphabetic characters.

6.2.2.20 limit mark

Description. used to illustrate the development of the use of modules, such as research, testing, testing, production and other information.

Constraints. Optional.

Value Format. variable length string.

6.2.2.21 owner

Description. The name of the module owners. Owner manager module is the module, he can target structure of the module, the module definition into

Row related operations.

Constraints. Required.

Value Format. variable length string.

6.2.2.22 Creator

Description. The first designer to create the name of the module.

Constraints. Required.

Value Format. variable length string.

6.2.2.23 Process Description

Description. All products associated with process information recording module, including such as heat treatment, surface treatment, treatment process and installation plans information.

Constraints. Optional.

Value Format. variable length string.

6.2.2.24 Marking explanation

Description. The module is used to describe the specific process requirements, labeling instructions are supplementary explanation of the module, it can be described from tolerance to process requirements

Of all cases.

Constraints. Required.

Value Format. variable length string.

6.2.2.25 model diagram

Description. The graphics module geometry of the display. According to user requirements, the geometry of the display module.

Constraints. Optional.

Value format. image or graphics file format.

6.2.2.26 connection relationship definitions

Description. Record information forming the connections between the modules defined parts assembly or module.

Constraints. Optional.

Value Format. variable length string.

6.2.2.27 seal definitions

Description. The composition of the recording seal definition information between modules or module parts assembly.

Constraints. Optional.

Value Format. variable length string.

6.2.2.28 Packing definitions

Description. The module record definition information when unpacked.

Constraints. Optional.

Value Format. variable length string.

Structural information 6.2.3 Module

6.2.3.1 The main contents

Module configuration information including part number, the number of parts.

6.2.3.2 Part Number

Description. List Part Number module contains.

Constraints. Required.

Value Format. variable length string.

6.2.3.3 the number of parts

Description. the number of parts included in the module.

Constraints. Required.

Value format. a positive integer.

External Information 6.2.4 Module

6.2.4.1 The main contents

External information modules include superior product number, unit version the superior products, the effectiveness of the batch, product type, logical expression, PIN code

And instructions are available.

6.2.4.2 superior product number

Description. a description of all the superior assembly part numbers or installation module applications.

Constraints. Required.

Value Format. variable length string.

Higher product unit version 6.2.4.3

Description. Description Multiple parent application modules or assemblies mount version.

Constraints. Required.

Value Format. variable length string.

6.2.4.4 Batch effectiveness

Description. The product shows the availability of the module, the module can be used to identify the effective application of the product batch. If the validity of the batch module

The module to be useful in certain production batch number, the module all the parts are available.

Constraints. Required.

Value Format. variable length string.

6.2.4.5 Model

Description. The application-specific product model of the module, the module that the product of the application, the application to a specific batch of product configuration.

Constraints. Required.

Value Format. variable length string.

6.2.4.6 logical expression

Description. A Boolean expression indicating which option or options to make joint module has validity.

Constraints. Required.

Value Format. variable length string.

6.2.4.7 PIN code

Description. Project ID module belongs.

Constraints. Required.

Value Format. variable length string.

6.2.4.8 Available Indicator

Description. Note whether the module is currently available state (Yes or No).

Constraints. Required.

Value format. the two-character string.

6.3 Requirements write data dictionary

Write data dictionary should comply with GB/T 24467-2009 Chapter 8 of the following requirements.

a) correctness

Should be provisions in the data dictionary element types and range of fill in accordance with this standard, to ensure the correctness of the contents of the data dictionary.

b) Authenticity

Ensure that the data dictionary is true, not false or exaggerated.

c) Readability

Where a "variable-length character string" fill in the content, the language should be concise and easy to understand.

d) authority

Owner recognized author data dictionary database or data files should be written, if necessary through the relevant departments approved

Or experts.

e) Integrity

Shall be in accordance with this standard constraint in the data dictionary elements fill. Where Required content should be completed. Optional content should as much as possible

You can fill more to help data managers and data users to more fully understand the data.

f) data dictionary expansion

Features allow for specific data sets, adding content is not listed in the data dictionary.

g) Update

With the update the database content, data dictionary contents should be updated.

Example 7 7.1 Turbine cylinder module classification example in Appendix A.

7.2

Turbine exhaust steam condensing section K45 module data dictionary example see Appendix B.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/T 30438-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 30438-2013

$255.00