Valid

GB/T 31494-2015Technical requirements and test methods for field strength meter of digital television (English PDF)

数字电视场强测试仪技术要求和测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31494-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 15, 2015

Implementation date

January 1, 2016

Scope

GB/T 31494-2015 is the English-translated version of 数字电视场强测试仪技术要求和测量方法.

GB/T 31494-2015 is the Chinese standard "Technical requirements and test methods for field strength meter of digital television". Its scope clause reads: This standard specifies the digital television field strength tester (hereinafter referred to as the field strength meter) main technical requirements and test methods.

This standard applies to terrestrial and cable transmission test field strength meter design, production and testing. Its clauses include requirements.

Found what you need?

Document preview — GB/T 31494-2015

National Standard of the People's Republic of China

ICS
17.220
Classification
L 85

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 Normative references
  • 3 Requirements
  • 3.1 Appearance and structure
  • 3.2 Performance and functional requirements

1 Scope

This standard specifies the digital television field strength tester (hereinafter referred to as the field strength meter) main technical requirements and test methods.

This standard applies to terrestrial and cable transmission test field strength meter design, production and testing.

2 Normative references

The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 6587-2012 General specification for electronic measuring instruments

GB 20600-2006 digital television terrestrial broadcasting system frame structure, channel coding and modulation

GY/T 170-2001 cable digital television broadcast channel coding and modulation specification

3 Requirements

3.1 Appearance and structure

There should be a clear product surface depressions, scratches, cracks, deformation, and pollution. Surface Coating should be uniform, not blistering, cracking, shedding

And wear. There should be no rust metal parts and other mechanical damage. Product no loose parts to be fastened on the panel buttons, switches, plug

Block and connectors should be firm, correct, flexible operation.

3.2 Performance and functional requirements

3.2.1 The basic functional requirements

Signal Level Meter shall have power measurement channel, channel lock, bit error rate (BER) measurements and other basic functions. Other functions such as measured constellation

Test and analysis, carrier to noise ratio (C/N) measurement as an optional feature, defined by the product standards.

3.2.2 Frequency Range

The minimum test frequency range. 5MHz ~ 870MHz.

3.2.3 Measurement bandwidth

Measurement should support 8MHz bandwidth optional support 6MHz, 7MHz bandwidth. Should channel table and digital TV formats are supported

It should be prescribed by product standards.

3.2.4 Support Channel Table

Support channel table specified by the product standard.

3.2.5 supports digital TV standard

It should support cable and (or) terrestrial television standard format, and support channel table corresponds.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31494-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31494-2015

$145.00