Valid

GB/T 31473-2015Halogen gas leak detector (English PDF)

卤素气体检漏仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31473-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

May 15, 2015

Implementation date

January 1, 2016

Scope

GB/T 31473-2015 is the English-translated version of 卤素气体检漏仪.

GB/T 31473-2015 is the Chinese standard "Halogen gas leak detector". Its scope clause reads: This standard specifies the halogen gas leak detector (hereinafter referred to as the leak detector) classification, technical requirements, test methods, inspection rules and signs, Packaging, transport and storage.

This standard applies to chemical, refrigeration and other industries halogen gas leakage detection and leak alarms, does not apply to mass-type leak detector.

Found what you need?

Document preview — GB/T 31473-2015

National Standard of the People's Republic of China

ICS
17.220
Classification
N 50

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Category
  • 4 technical requirements
  • 4.1 Rated operating conditions
  • 4.2 appearance requirements
  • 4.3 Functional Requirements
  • 4.4 Performance Requirements
  • 4.5 Safety Requirements
  • 4.6 Environmental Adaptability Requirement
  • 5 Test Method
  • 5.1 Test equipment
  • 5.2 Test conditions
  • 5.3 Visual inspection
  • 5.4 normal function test
  • 5.5 Leak performance
  • 6 5.6 Safety Test
  • 5.7 Environmental Adaptability Test
  • 6 Inspection rules
  • 6.1 Inspection classification
  • 6.2 factory inspection
  • 6.3 Type inspection
  • 7 signs, packaging, transportation and storage
  • 7.1 marks
  • 7.2 Packaging
  • 7.3 Transport
  • 7.4 Storage

1 Scope

This standard specifies the halogen gas leak detector (hereinafter referred to as the leak detector) classification, technical requirements, test methods, inspection rules and signs,

Packaging, transport and storage.

This standard applies to chemical, refrigeration and other industries halogen gas leakage detection and leak alarms, does not apply to mass-type leak detector.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2829-2002 periodic inspection Sampling procedures and tables (suitable for process stability test)

GB 4793.1-2007 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements

GB/T 6587-2012 General specification for electronic measuring instruments

GB/T 13384-2008 mechanical and electrical products packaging General technical conditions

Category 3

Reading can be divided according to the type of numeric and non-numeric types.

According to the magnitude of the measurement object can be divided into concentration type (such as value expressed in µmol/mol, mg/m3, etc.) and the leak rate type (such as money to

Pa · m3 · s-1, g/a, etc. shown).

4. Technical Requirements

4.1 Rated operating conditions

Leak detector should be able to meet under the operating conditions specified in Table 1.

Table 1 Rated operating conditions

Conditions on the amount of nominal operating conditions atmosphere condition

Ambient temperature 0 °C ~ 40 °C

Relative humidity <=90%

Atmospheric pressure 70.0kPa ~ 106.0kPa

Avoid direct solar radiation

Air flow rate 0m/s ~ 0.5m/s power supply condition voltage

AC 220 × (1 ± 10%) V

Reference implementation of the remaining power supply

Power frequency 50 × (1 ± 5%) Hz […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31473-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31473-2015

$185.00