GB/T 31301.5-2015Footwear machines—Safety requirements—Part 5: Splitting,Trimming and cutting machines (English PDF)

1 Scope

This section provides piece leather machine, trimming machine and cutting machine construction, transportation, installation, commissioning, setting, teaching or process changeover, operation, clear

Wash, maintenance, scrap, dismantling of the relevant safety requirements. This section contains the operator of the machine's intended use and foreseeable misuse arising,

All major hazards, hazardous situations and hazardous events within the scope of this machine-dependent (see Appendix A).

This section applies to the footwear industry leather sheet material for processing machine, trimming machine and cutting machine.

This section does not apply to.

--- Use rotary milling tool material trimming trimmer;

--- Sectional layer leather industry machines used;

--- Portable machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3766-2001 Hydraulic System General technical conditions

GB 4706.88-2008 household and similar electrical appliances - Safety industrial and commercial power brush wet or dry cleaners special

Claim

GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements

GB/T 7932-2003 General technical conditions of pneumatic systems

GB/T 8196-2003 mechanical safety devices fixed and movable guards General requirements for the design and manufacture

GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching element Electromechanical control

Electrical circuit

Reducing the GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk

GB 16754-2008 Safety of machinery - Emergency stop design principles

GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design

GB/T 17454.1-2008 Safety of machinery - Part 1 - sensitive protective devices. pressure sensitive mats and pressure sensitive floors of design and testing

General rule

GB/T 17454.2-2008 Safety of machinery - Part 2 sensitive protective devices. pressure sensitive edges and pressure sensitive bars design and testing General

GB 17888.1-2008 Safety of machinery stationary facilities - Part 1. enter a fixed means of access between two levels s Choice

GB 17888.2-2008 Safety of machinery stationary facilities - Part 2. Working platforms and gangways

GB 18209.1-2010 Electrical safety of machinery - Indication, marking and actuation - Part 1. Requirements for visual, auditory and tactile signals

Claim

GB/T 18569.1-2001 Safety of machinery decreased from hazardous substances emitted by machinery health risk - Part 1. for

Machinery manufacturers principles and norms

GB/T 18569.2-2001 Safety of machinery decreased from hazardous substances emitted by machinery health risk - Part 2. Generate […]