GB/T 31301.1-2015Footwear manufacturing machines—Safety requirements—Part 1: Lasting machines (English PDF)

1 Scope

This section GB/T 31301 specifies the use of safety-related machine stretch to help design, construction and machinery. This section contains the operator of the machine

The intended use and foreseeable misuse arising from all major hazards, hazardous situations and hazardous events associated with the stretch to help (see Appendix A).

This section applies to stretch with the help of machines used in the footwear industry, including.

--- Adhesive stretch before with the help of machine (see Figure 1);

--- After the stretch to help gluing machine (see Figure 2);

--- Adhesive stretch after to help machine (see Figure 2);

After the stretch to help --- nailing machine (see Figure 2);

--- After nailing stretch to help, with the help of adhesive stretch in the machine (see Figure 2);

--- Nailing stretch heel help, help in gluing stretch machine (see Figure 2);

--- Nailing and gluing to help stretch the heel nailing machine with the help of the stretch (see Figure 2).

--- Manual gluing help stretch the machine (see Figure 3);

--- Manual nailing (flat nails/staples) to help stretch the machine (see Figure 4).

This section does not apply to the use of hot melt adhesive particles help stretch machine.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 3766-2001 Hydraulic System General technical conditions

GB 5226.1-2008 Safety of machinery - Electrical machinery and electrical equipment - Part 1. General requirements

GB/T 7932-2003 General technical conditions of pneumatic systems

GB/T 8196-2003 mechanical safety devices fixed and movable guards General requirements for the design and manufacture

GB 14048.4-2010 Low-voltage switchgear and control equipment - Part 4-1. Contactors and motor starters electromechanical contact

Contactors and motor starters (with motor protection)

GB 14048.5-2008 Low-voltage switchgear and control equipment Part 5-1. Control circuit devices and switching element Electromechanical control

Electrical circuit

GB/T 15706-2012 Safety of machinery - General principles for design risk assessment and risk reduced

GB 16754-2008 Safety of machinery - Emergency stop design principles

GB/T 16855.1-2008 Safety of machinery - Safety-related control system components - Part 1. General principles for design

GB/T 18153-2000 Safety of machinery - accessible surface temperature Ergonomics data to establish temperature limit values for hot surfaces

GB 18209.1-2000 Electrical safety of machinery - Indication, marking and actuation - Part 1. Requirements for visual, auditory and tactile signals

Claim

GB/T 18717.1-2002 for the safety of machinery - Ergonomic design - Part 1. body into the correct mechanical opening size

With principles

Ergonomic design - Part 2 GB/T 18717.2-2002 for the safety of machinery. body into mechanical foot opening

Inch determining principle […]