GB/T 31226-2014Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components (English PDF)
扫描隧道显微术测定气体配送系统部件表面粗糙度的方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31226-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 30, 2014
Implementation date
April 15, 2015
Scope
GB/T 31226-2014 is the English-translated version of 扫描隧道显微术测定气体配送系统部件表面粗糙度的方法.
GB/T 31226-2014 is the Chinese standard "Standard test method for determination of surface roughness by scanning tunneling microscopy for gas distribution system components".
Its scope clause reads: This standard specifies a method using a scanning tunneling microscope (STM) to analyze the gas distribution system components, surface roughness of.
This standard applies to the characterization of the surface roughness Ra of less than 0.25µm stainless determination. This standard does not apply to not produce a thick layer of iron oxide tunneling effect. Its clauses include terms and definitions, symbols and abbreviations.
Found what you need?
Document preview — GB/T 31226-2014
National Standard of the People's Republic of China
- ICS
- 17.040.20
- Classification
- J 04
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, symbols and abbreviations
- 3.1 Terms and Definitions
1 Scope
This standard specifies a method using a scanning tunneling microscope (STM) to analyze the gas distribution system components, surface roughness of.
This standard applies to the characterization of the surface roughness Ra of less than 0.25µm stainless determination.
This standard does not apply to not produce a thick layer of iron oxide tunneling effect.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Test Method for Determination of ASTME691 between precision laboratory studies Standard Practice (PracticeforConducting anInterlaboratoryStudytoDeterminethePrecisionofaTestMethod)
ANSIB46.1. 1985 surface structure (surface roughness, waviness and torsion degree) [SurfaceTexture (SurfaceRough- ness, Waviness, andLay)]
3 Terms and definitions, symbols and abbreviations
3.1 Terms and Definitions
The following terms and definitions apply to this document.
3.1.1 Artifact
Non-real surface topography, including vibration, electrical noise, thermal drift or no influence over the formation of a probe topography.
3.1.2 Centerline
Image centerline graphicalcenterline
Test direction parallel to the contour lines, so that the area between it and the contour equal on both sides of the center line.
3.1.3 Intercept length
lc
Herein for the contour, i.e. the length of the sample, i.e. a scan length in nanometers (nm).
3.1.4 Current
This standard middle finger under certain conditions, the current flowing through the tunnel (nA) probe and the sample surface in any direction.
3.1.5 Characteristics height
Scanning tunneling within the scope of any point relative to the lowest point of elevation data (height z direction), which is generated from the probe during scanning […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31226-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31226-2014
$225.00