GB/T 31189-2014Technical regulation for metal phosphorus from waste water recovery (English PDF)
金属磷化废水中磷回收技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31189-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
May 1, 2015
Scope
GB/T 31189-2014 is the English-translated version of 金属磷化废水中磷回收技术规范.
GB/T 31189-2014 specifies the technology for recycling the phosphorus held in metal phosphate waste water, covering the terms and definitions, how that waste water is generated, its characteristics, the recycling itself and safety.
Clause 1 states that it applies to the recycling of phosphorus from such waste water by chemical treatment and precipitation.
Clause 2 gives four definitions, among them phosphating, the phosphate conversion coating formed as an insoluble film on the base metal surface, and the metal phosphate waste water generated by the degreasing, surface conditioning, phosphating and related stages of metal surface treatment.
Clause 3 describes how that waste water arises, from a phosphating line that typically runs through caustic degreasing, water rinsing, cold water rinsing, pickling for rust, phosphating and a second cold rinse, and that mainly produces caustic emulsified waste water, rinsing water and acid phosphate waste water.
Clause 4 describes the characteristics of the waste water, where the phosphorus is present mainly as inorganic salts such as zinc dihydrogen phosphate alongside acid and alkaline substances, oil and suspended solids, and where the phosphating process used may also bring in nickel, copper or lead ions and surface active agents.
Clause 5 opens the recycling proper with the principle of chemical treatment and precipitation, but the draft published on the page breaks off in the middle of that subclause, as it names calcium and iron ions, so nothing further of clause 5 and nothing of the safety provisions announced in clause 1 can be read.
The foreword records that the standard was proposed by the China Petroleum and Chemical Industry Association and is centralized by the national waste chemicals disposal Standardization Technical Committee (SAC/TC294). It was issued on 3 September 2014 and has applied since 1 May 2015.
Found what you need?
Document preview — GB/T 31189-2014
National Standard of the People's Republic of China
- ICS
- 13.030.20
- Classification
- Z 05
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Terms and definitions
- 3 Metal phosphide generate wastewater
- 4 Metal phosphate wastewater characteristics
- 5 Metal phosphate phosphorus in waste water recycling
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Petroleum and Chemical Industry Association.
1 Scope
This standard specifies the terms and definitions special metal phosphate phosphorus in waste water recycling technology to produce metal phosphate wastewater, wastewater metal phosphide Of metal phosphate phosphorus in waste water recycling and safety.
This standard applies to chemical treatment - precipitation recycling metal phosphate phosphorus in waste water.
2 Terms and definitions
The following terms and definitions for use in the present document.
2.1 Phosphide
Phosphate is a process of chemical and electrochemical reaction to form a phosphate chemical conversion coating film.
2.2 Phosphate conversion coating
Metal (mainly steel) after containing zinc (Zn), manganese (Mn), chromium (Cr), was treated with iron (Fe) and other phosphate in the base metal sheet Surface forming an insoluble phosphate film.
2.3 Phosphating
The metal materials and parts placed in a phosphate solution containing manganese, iron, zinc in chemical treatment of the metal material and workpiece surface Generate a phosphate process protection film is insoluble in water.
2.4 Metal phosphate waste
Metal phosphate waste water is wastewater, wastewater phosphorus metal surface by degreasing, degreasing, surface conditioning, phosphating and other major processes generated.
3 Metal phosphide generate wastewater
Metal phosphating process typically includes caustic degreasing, rinsing water, cold water rinsing, pickling rust, and phosphate, and other secondary cold rinse step. in Its process, mainly produce caustic emulsified wastewater, rinsing water, acid phosphate waste and other waste water.
4 Metal phosphate wastewater characteristics
Mainly in the form of inorganic salts such as zinc dihydrogen phosphate presence, in addition to acid, alkali substances, oil and suspended solids and other pollutants. due to Different phosphating process may also contain a certain amount of nickel ions (Ni2), copper ion (Cu2) or lead ions (Pb2) and other heavy metal ions and tables Surface active agent.
5 Metal phosphate phosphorus in waste water recycling
5.1 Chemical treatment - Principle of precipitation
Under certain conditions, the metal phosphate in wastewater phosphate (PO3-4) and calcium (Ca2), ferrous ions (Fe2), trivalent iron ions
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31189-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31189-2014
$145.00