GB/T 31133-2014Specification for hydraulic lifting equipment in power construction (English PDF)
电力设备用液压式提升设备技术规范
This is a limited preview
Buy now to download the full PDF (17 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31133-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 3, 2014
Implementation date
February 1, 2015
Scope
GB/T 31133-2014 is the English-translated version of 电力设备用液压式提升设备技术规范.
GB/T 31133-2014 is the Chinese standard "Specification for hydraulic lifting equipment in power construction".
Its scope clause reads: This standard specifies the electrical equipment with the type of hydraulic lifting equipment, the main technical parameters, technical requirements, test methods, inspection rules And signs, packaging, transportation, storage and so on.
This standard applies to cable for the load-bearing member, lift the load lifting device with a hydraulic jack (the jack). Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 31133-2014
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- K 60
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Type
- 6 Technical requirements
- 7 Test methods
- 8 Inspection Rules
- 9 signs, packaging, transportation and storage
- References
1 Scope
This standard specifies the electrical equipment with the type of hydraulic lifting equipment, the main technical parameters, technical requirements, test methods, inspection rules
And signs, packaging, transportation, storage and so on.
This standard applies to cable for the load-bearing member, lift the load lifting device with a hydraulic jack (the jack).
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 699 high-quality carbon structural steel
GB/T 1591 high strength low alloy structural steel
GB/T 2828 Sampling procedures for inspection
GB/T 3077 alloy steel
GB/T 3766-2001 Hydraulic System General technical conditions
GB 4208-2008 enclosure class
GB/T 5224-2003 prestressed concrete strand
GB 5226.2-2002 Safety of machinery - Electrical equipment - Part 32. Requirements for hoisting machines
Part of GB/T 6067.1-2010 crane safety regulations 1. General
GB/T 7631.2-2003 Lubricants, industrial oils and related products (L class) classification - Part 2. H (Hydraulic systems)
GB/T 7935-2005 General technical conditions for hydraulic components
GB/T 13306-2011 signage
GB/T 13342-2007 Marine reciprocating hydraulic cylinder General technical conditions
GB/T 13384-2008 mechanical and electrical products packaging General technical conditions
GB/T 14370-2007 tendons anchorage, grip and coupler
GB 16710-2010 earthmoving machinery noise limits
GB/T 19678-2005 constitute specification preparation, content and presentation methods
Steel structure design specification GB 50017-2003
Construction Quality GB/T 50205-2001 Steel Works acceptance
GB 50661-2011 Steel Welding Code
TSGQ7001-2006 lifting machinery manufacturing supervision and inspection rules
TSGQ7008-2007 lift Type Test Rule
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Hydraulic lifting equipment
Steel cables for the load-bearing member, pushing the master cylinder piston reciprocates jacks with hydraulic oil, so that the upper end of the piston on the card connected firmly mounted […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31133-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 31133-2014
$295.00