Valid

GB/T 31124-2014Poly(Propylene Carbonate)(PPC) (English PDF)

聚碳酸亚丙酯(PPC)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31124-2014 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 3, 2014

Implementation date

March 1, 2015

Scope

GB/T 31124-2014 is the English-translated version of 聚碳酸亚丙酯(PPC).

GB/T 31124-2014 is the Chinese standard "Poly(Propylene Carbonate)(PPC)". Its scope clause reads: This standard specifies the technical requirements of poly (propylene carbonate) (polypropylenecarbonate, PPC) product, test methods, inspection regulations Then, signs, packaging, transport and storage.

This standard applies to the carbon dioxide and propylene oxide as raw materials by catalytic polymerization of poly (propylene carbonate) (PPC) and PPC resin Polyol.

Found what you need?

Document preview — GB/T 31124-2014

National Standard of the People's Republic of China

ICS
83.080.01
Classification
Y 28

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 1033.3-2010 non-plastic foam density measurement GB/T Part 3. Gas pyknometer method

1 Scope

This standard specifies the technical requirements of poly (propylene carbonate) (polypropylenecarbonate, PPC) product, test methods, inspection regulations

Then, signs, packaging, transport and storage.

This standard applies to the carbon dioxide and propylene oxide as raw materials by catalytic polymerization of poly (propylene carbonate) (PPC) and PPC resin

Polyol.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein

Member. For undated references, the latest edition (including any amendments) applies to this document.

1033.3-2010 non-plastic foam density measurement GB/T Part 3. Gas pyknometer method

GB /1040.2-2006 Plastics Determination of tensile properties T Part 2. Test plastics molding and extrusion conditions

GB /1043.1-2008 plastic Charpy impact properties measured T Part 1. Non-instrumented impact test

GB/T 2547-2008 plastic sampling method

GB/T 2918-1998 plastic sample conditioning and testing of the standard environment

Determination of GB/T 3682-2000 quality thermoplastic melt flow rate and melt volume flow rate

GB/T 6680 General rules for sampling liquid chemical products

GB/T 9345.1-2008 Plastics - Determination of ash - Part 1. General Method

GB/T 9352-2008 plastic compression molding of thermoplastic material samples

Determination of hydroxyl value. GB/T 12008.3-2009 plastic polyether polyol Part 3

GB/T 12008.5-2010 plastic polyether polyols - Part 5. Determination of acid value

GB/T 12008.7-2010 plastic polyether polyols - Part 7. Determination of viscosity

Determination of GB/T 19276.1-2003 material in an aqueous medium of the ultimate aerobic biodegradability measured using a closed respirometer

The Oxygen Demand

Determination of GB/T 19276.2-2003 material in an aqueous medium of the ultimate aerobic biodegradability was determined by the release of carbon

CFC method

Measured at GB/T 19277.1-2011 controlled composting conditions for the ultimate aerobic biodegradability was determined by the release of two

Carbon dioxide - Part 1. General Method

Measured at GB/T 19277.2-2013 controlled composting conditions for the ultimate aerobic biodegradability was determined by the release of two

Carbon dioxide - Part 2. Determination of carbon dioxide emissions under laboratory conditions by gravimetric analysis

GB/T 19466.1-2004 plastic differential scanning calorimetry (DSC) - Part 1. General

GB/T 19466.2-2004 plastic differential scanning calorimetry (DSC) - Part 2. Determination of glass transition temperature

Determination of GB/T 22313-2008 plastic used in the production of polyurethane polyols water content

GB/T 28206-2011 compostable plastic technical requirements

General principles of thermal analysis method SN/T 3003-2011 plastic polymer (TG) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 31124-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 31124-2014

$205.00