Valid

GB/T 31052.9-2016Lifting appliances—Code of inspection and maintenance—Part 9: Lifters (English PDF)

起重机械检查与维护规程第9部分：升降机

Preview PDF

This is a limited preview

Buy now to download the full PDF (41 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31052.9-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 13, 2016

Implementation date

May 1, 2017

Scope

GB/T 31052.9-2016 is the English-translated version of 起重机械检查与维护规程第9部分：升降机.

GB/T 31052.9-2016 is the Chinese standard "Lifting appliances—Code of inspection and maintenance—Part 9: Lifters". Its scope clause reads: This part of GB/T 31052 specifies the basic requirements for inspection and maintenance of lifts during use.

This part applies to the lift specified in Appendix A of GB/T 31052.1-2014, which includes the shipper, hoist, simple lift Machine, construction lifts, cable hydraulic lifting device, power station to mention sliding mode devices and other products.

Its clauses include normative reference documents; terms and definitions; general requirements; check.

Found what you need?

Document preview — GB/T 31052.9-2016

National Standard of the People's Republic of China

ICS: 53.020.99
Classification: J 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

5 check
6 maintenance
7 Safety precautions for inspection and maintenance
Appendix A (normative appendix) Routine inspection and periodic inspection of items, methods, contents and requirements
Appendix B (normative appendices) Special inspection conditions, items, methods, contents and requirements
Appendix C (informative) inspection report
Appendix D (Normative Appendix) Program Maintenance Project
Appendix E (informative) Maintenance records

1 Scope

This part of GB/T 31052 specifies the basic requirements for inspection and maintenance of lifts during use.

This part applies to the lift specified in Appendix A of GB/T 31052.1-2014, which includes the shipper, hoist, simple lift

Machine, construction lifts, cable hydraulic lifting device, power station to mention sliding mode devices and other products.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all modifications) applies to this document.

GB 4208-2008 enclosure protection class (IP code)

GB/T 5972 crane wire rope maintenance, maintenance, installation, inspection and scrapping

Safety rules for hoisting machinery - Part 1. General

Hydraulic hoist for GB/T GB 26557-2011 hanging cage with vertical guide to the dual-use construction of the lift

Safety rules for simple lifts

Lifting machinery inspection and maintenance procedures - Part 1. General principles GB/T 31052.1-2014

Code for manufacture, installation and acceptance of hoist for water conservancy and hydropower project

JB/T 9008.2 Wire rope electric hoist - Part 2. Test methods

JB/T 12215-2015 wire rope hoisting lift vertical lift

3 terms and definitions

The terms and definitions defined in GB/T 31052.1 apply to this document.

4 General requirements

Inspection and maintenance of the general requirements should be consistent with GB/T 31052.1-2014 in Chapter 4 of the provisions.

5 check

5.1 daily inspection

According to the specific use of the lift, to determine the daily inspection items and inspection requirements, and should not be less than the provisions of Appendix A.

5.2 Periodic inspection

According to the characteristics of each lift, the work level, working environment and the use of state, to determine the regular inspection items, inspection requirements and inspection week […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 41 pages — is available in the English PDF.

Similar standards

GB/T 26470-2025|GB/T 46621-2025|GB/T 10597-2022|GB/T 41976-2022|GB 40160-2021|GB/T 10054.1-2021

How to Download GB/T 31052.9-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.