Valid

GB/T 31052.10-2016Lifting appliances - Code of inspection and maintenance - Part 10: Series lifting equipments (English PDF)

起重机械检查与维护规程第10部分：轻小型起重设备

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/T 31052.10-2016 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

February 24, 2016

Implementation date

February 24, 2016

Scope

GB/T 31052.10-2016 is the English-translated version of 起重机械检查与维护规程第10部分：轻小型起重设备.

GB/T 31052.10-2016 is the Chinese standard "Lifting appliances - Code of inspection and maintenance - Part 10: Series lifting equipments". Its scope clause reads: GB/T 31052 provisions of this part of the basic requirements of the inspection and maintenance of the small light lifting equipment in use should be carried out.

This section applies to GB/T 31052.1-2014 specified in Appendix A small light lifting equipment (hereinafter referred to as "equipment"). Its clauses include terms and definitions; general requirements; check.

Found what you need?

Document preview — GB/T 31052.10-2016

National Standard of the People's Republic of China

ICS: 53.020.20
Classification: J 80

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Introduction III ...
1 Scope 1 ...
2 Normative references 1 ...
3 Terms and definitions ...
4 General requirements 1 ...
5 Check 1 ...
6 Maintenance 2 ...
7 Inspection and maintenance of the safety precautions 2 ...
Appendix A (normative) daily and periodic inspection programs, methods, content and requirements ...
Appendix B (normative) special inspection items, methods, content and requirements ...
Annex C (informative) Inspection Report 15 ...
Annex D (informative) Maintenance Record 16 ...
References 17 ...

1 Scope

GB/T 31052 provisions of this part of the basic requirements of the inspection and maintenance of the small light lifting equipment in use should be carried out.

This section applies to GB/T 31052.1-2014 specified in Appendix A small light lifting equipment (hereinafter referred to as "equipment").

2 Normative references

The following documents for the application of this document is essential. For cited documents with dates, only the dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 5972 crane wire rope maintenance, maintenance, installation, examination and discard

GB 6067.1-2010 crane safety regulations - Part 1. General

GB/T 10051.2 lifting hook - Part 2. Forged hook technical conditions

GB/T 10051.3 lifting hooks - Part 3. Forged hook in check

GB/T 31052.1-2014 crane inspection and maintenance procedures - Part 1. General

3 Terms and Definitions

Terms and definitions GB/T 31052.1 defined apply to this document.

4 General requirements

Inspection and maintenance of general requirements should be consistent with the provisions of GB/T 31052.1-2014 in Chapter 4.

5 Check

5.1 Daily Inspection

Shall determine the daily inspection items and inspection requirements according to the specific characteristics of each device, and should not be less than the specified in Appendix A of.

5.2 Periodic inspection

Depending on the characteristics of the equipment to determine the periodic inspection period is monthly inspection, quarterly inspection and annual inspection.

According to the working level of each piece of equipment, the working environment and the use of periodic checks to determine the status of the project, inspection requirements and inspection cycle, and should not be less than the specified in Appendix A of. Lifting equipment for the molten metal and other dangerous goods, should be appropriate to shorten the examination period.

5.3 Special inspection

5.3.1

In the event of GB/T cases specified in 5.3.1 31052.1-2014 special inspection should be carried out.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

GB/T 26474-2026|GB/T 27997-2026|GB/T 47720-2026|GB/T 47722-2026|GB/T 47748-2026|GB/T 19683-2025

How to Download GB/T 31052.10-2016

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.