GB/T 31025-2014Cleaning fluid for motor vehicle engine surface (English PDF)
机动车发动机外表面清洗液
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 31025-2014 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 5, 2014
Implementation date
May 1, 2015
Scope
GB/T 31025-2014 is the English-translated version of 机动车发动机外表面清洗液.
GB/T 31025-2014 is the Chinese standard "Cleaning fluid for motor vehicle engine surface".
Its scope clause reads: This standard specifies the motor vehicle repair process for cleaning the engine outer surface of the water-based automotive engine outer surface cleaning Liquid technical requirements, test methods, inspection rules and signs, packaging, transportation and storage requirements.
This standard applies to water-based cleaning fluid outer surface of the motor vehicle engine production and testing. Its clauses include requirements and test methods.
Found what you need?
Document preview — GB/T 31025-2014
National Standard of the People's Republic of China
- ICS
- 03.220.20
- Classification
- R 16
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 requirements and test methods
- 3.1 General requirements
- 3.2 Technical requirements and test methods
1 Scope
This standard specifies the motor vehicle repair process for cleaning the engine outer surface of the water-based automotive engine outer surface cleaning
Liquid technical requirements, test methods, inspection rules and signs, packaging, transportation and storage requirements.
This standard applies to water-based cleaning fluid outer surface of the motor vehicle engine production and testing.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 261 Flash Point by Pensky - Martens closed cup method
GB/T 3280 stainless steel cold-rolled steel sheet and strip
GB/T 4756 petroleum liquids hand sampling method
Determination of GB/T 6908 boiler water and cooling water conductivity analysis method
GB/T 9724 General rule for determination of pH chemical reagent
GB/T 11158 temperature test chambers
GB 12981 Motor Vehicle Brake Fluid
GB 13042 Iron containers aerosol cans
GB/T 23435 EFI car fuel injector cleaning fluid
GB/T 23436 car windshield cleaning fluid
SH0164 petroleum product packaging, storage and delivery acceptance rules
3 requirements and test methods
3.1 General requirements
In the production process, can not use the relevant state laws and regulations prohibit the use of raw materials, and wherein the volatile organic compound content
After using the waste should be treated in line with national environmental requirements related.
3.2 Technical requirements and test methods
Technical requirements and test methods for automotive engine outer surface of the cleaning fluid are shown in Table 1.
Table 1, the outer surface of the vehicle engine technical requirements and test methods of cleaning fluid
Project technical requirements, test methods
Appearance homogeneous liquid without visible impurities GB/T 23436 Appendix A
Flash point (closed) a/°C >=61 GB/T 261
Conductivity (25 °C)/(µS/cm) <=150 GB/T 6908 […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 31025-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 31025-2014
$125.00